Function Operation Instructions
Start-up instructions
Turn on the power supply, turn on the power switch and the machine will
enter the standby state quickly; the remote control will start the machine
at 0.6MPH.
Display screen instructions
Infrared receiving: When using the remote control product to operate, the
remote control needs to be aimed at this position.
Function display: SPEED display when adjusting the speed operation, the
speed parameters are displayed at this time; SPEED, CAL, TIME, DIST. are
displayed in a cycle every 3 seconds respectively when the machine is running
without operation.
Description of the remote control key functions
Function display: speed, calories, time, distance.
To Next Page
Loading...