Bike Installation Instructions
Snap the front tire of the ebike into the fixed frame, place the rear tire in the beam, and then use the ratchet wheel straps to fix the
front wheel, rear wheel, and seat tube of the bicycle as shown in the figure below.
It should place the first bike or a bike to the side which is close to the vehicle.
Note: Use the ratchet wheel strap
to fix and tighten the seat tube or
horizontal tube of the bicycle.
Note: Use the ratchet wheel strap
to fix and tighten the front wheel of
the bicycle.
Note: The rear tire fixing seat needs
to be placed in front of the rear
wheel.
To Next Page
Loading...
