The WanderBliss™ Portable Diffuser is a stylish and compact device designed to diffuse essential oils, making it suitable for any winter wonderland or holiday adventure. It is exclusively designed for Young Living essential oils.
Function Description
The WanderBliss™ Portable Diffuser is an ultrasonic diffuser that atomizes essential oils into a fine mist, filling your space with delightful scents. It offers flexible diffusion times, running for up to 3 hours non-stop when unplugged, or up to 5.5 hours intermittently when plugged in. It can also run for 12 hours intermittently when plugged in. The device features an On/Off button that also controls the LED light. It has a battery LED indicator to show charging status and battery level.
Important Technical Specifications
- Product Name: WanderBliss™ Portable Diffuser
- Item No.: 44301
- Dimensions: 172 mm height x 70 mm diameter
- Material: Polypropylene (PP) + Metal
- Weight: 10.3 oz. (291g)
- Power Source: DC5V 5W
- Atomized Particle Diameter: 5µm
- Water Type: Room-temperature tap or spring water
- Container Capacity: 80 ml
- Coverage Area: Up to 20 sq. m.
- Diffusion run time: Up to 5.5 hours (up to 12 hours intermittent mode)
- Ultrasonic Frequency: 2.4 million waves per second
- Environment: Indoor
Usage Features
Getting Started:
- Twist and remove the outer cover.
- Add water until it reaches the red water fill line marker. Do not exceed this line.
- Add 3-4 drops of Young Living essential oil.
- Replace the outer cover and rotate until it locks into place.
- Plug the USB cable into a power outlet. (Ensure the diffuser is not charging if you haven't charged it before use).
- Press the On/Off button to switch on the diffuser.
- The unit should produce mist, and the LED light should be on.
Charging Function:
- Before first use, fully charge the device.
- The charging time is approximately 4.5 hours to reach 100 percent charge.
- The battery can power the diffuser for up to 3 hours continuously.
- When plugged into a USB power source, the diffuser can operate continuously until the reservoir is empty.
On/Off Button Settings:
- Press once: Turns on the diffuser. The default white light will be on, and the diffuser will run until the reservoir is empty.
- Press twice: Sets the diffuser to run for 30 minutes and then shut off automatically.
- Press three times: Sets the diffuser to run for 5-minutes on/5-minutes off intervals until the reservoir is empty.
- Press four times: Sets the diffuser to run for 30-seconds on/30-seconds off intervals until the reservoir is empty.
- Press five times: Turns off the diffuser.
LED Light Settings:
- When the default light is on, hold the button for two seconds to turn off the LED light.
- Hold the button for another two seconds to turn on the LED light.
- The red LED light will flash three times if the water level is low.
Battery LED Indicator:
- Charging: Candielight
- Full battery: White light
- Low battery: Flashing candielight three times
Note on Mist Amount:
A slight difference in mist amount produced by different units is expected. Factors affecting the mist amount include water, humidity, temperature, and airflow. The diffuser will shut off automatically when the water reservoir is empty or when it is tipped over.
Maintenance Features
Safety and Care Instructions:
- Unplug the diffuser immediately and discontinue use in the event of smoke or a burning smell.
- Use room-temperature tap, spring, or distilled water.
- Never wrap the adapter with cloth, paper, etc. Such actions may result in damage to the diffuser or fire.
- Never touch the adapter with wet hands; electric shock or injury may occur.
- Do not disassemble or attempt to repair the diffuser; this will void the warranty.
- Do not remove or place objects in the water reservoir during operation.
- Do not place your fingers in the water during operation; this may result in injury.
- Do not place acidic or alkaline chemicals in the reservoir.
- Use only the included USB power cable provided in the packaging or by Young Living.
- Any damage caused by the user does not qualify for replacement by Young Living.
- Do not use metal objects to clean the ultrasonic plate; use only a cotton swab or cloth dipped in rubbing alcohol, vinegar, or Thieves® Household Cleaner.
- Never use the diffuser for purposes other than those listed in this manual.
- If the diffuser will not be used for an extended period or needs to be relocated, unplug the power adapter, empty the water reservoir, and wipe the unit clean before storage.
- Clean the diffuser before switching to different essential oils.
- Use only authentic essential oils. Artificial, synthetic, or impure oils and fragrances can damage the diffuser.
- The water reservoir level should not exceed the water fill line.
- When unplugging the power adapter, pull from the adapter plug instead of pulling the wire.
- Avoid placing the product under direct sunlight, close to a refrigerator or fan, or in a hot environment. Do not leave in a hot vehicle for a long period of time.
Cleaning and Maintenance:
- Always turn off and unplug the diffuser prior to cleaning.
- To ensure proper performance, clean the ultrasonic plate and lid after each use.
- If essential oil begins to build up on the ultrasonic plate, gently wipe it off using a cotton swab dipped in rubbing alcohol, vinegar, or Thieves® Household Cleaner.
- If essential oil begins to build up on the lid, gently wipe it off using mild soap and water only. Never use a corrosive detergent to clean the ultrasonic plate or damage will occur.
- Periodically check under the diffuser to keep the fan intake free of debris. Debris can be removed by blowing on the fan intake opening or wiping with a clean, dry cloth. Do not use aerosol sprays, solvents, or abrasives to clean the plastic housing.
- When the diffuser is not in use, clean it and let it dry before storing.
Troubleshooting:
- When switched on, the diffuser does not operate (Potential issues: low battery, water above water fill line marker).
- Charge the diffuser for up to 4.5 hours. Check that the adapter is securely plugged into the wall socket and the rear of the diffuser.
- Check that water is in the reservoir and it is not above the red water fill line marker. If there is too much water, unplug the unit and carefully pour out the excess water from the opposite side of the base ventilation hole. When you restart the diffuser, the light should come on and the diffuser should mist.
- There is no mist or less mist than usual (Potential issues: water above fill line, oil buildup on the ultrasonic plate, ultrasonic plate has stopped working, fan vents or mist spouts are obstructed, fan is not working).
- Unplug the diffuser before performing the following procedures:
- Check the water level. If the water is above the water fill line, carefully pour out the excess water from the opposite side of the base ventilation hole.
- With the outer lid in place, verify that the mist spout holes, on the outer lid, are clear and free from any debris.
- Check for essential oil buildup on the ultrasonic plate. If oil buildup is present, follow the cleaning instructions. The ultrasonic plate must be free of residual oil buildup for the diffuser to operate properly.
- Check that the fan intake under the diffuser is free of any obstruction or debris that may restrict airflow. (After the diffuser is on, you should hear the fan.)
- Refill the water reservoir to the water fill line marker and restart.
- The light does not work (Potential issue: power connection).
- Press the On/Off button to verify that the light is functioning. If the light does not work, call Member Services for further instructions.
- Water is leaking from the unit (Potential issue: outer lid is not locked in place).
- Verify that the outer lid is in place. If the external air temperature is very low or there is a high level of humidity in the air, the diffuser mist may condense into water droplets.
- When switched on, the light flashes once and then shuts off (Potential issue: no water in the diffuser).
- Check that water is in the reservoir and it is not above the red water fill line marker. If there is too much water, unplug the unit and carefully pour out the excess water from the opposite side of the base ventilation hole, then restart the diffuser.
Need help?
General
To Next Page