Youngman BoSS X3X-SP User Manual

Picture of
machine being
used in situ. at full
height.
The ultimate self propelled micro scissor lift
INSTRUCTIONS
FOR USE
Edition April 2011
EN 280 IP54

Youngman BoSS X3X-SP Specifications

General

Brand	Youngman
Model	BoSS X3X-SP
Category	Scissor Lifts
Language	English

Summary

Product Introduction and Description

1.2 Characteristics and Description

1.3 Intended Use

Specifies the purpose and applications for the BOSS X3X-SP.

1.4 Selection and Minimum Attributes of Operators

Technical Specifications and Operating Site

2.1 Technical Data

Presents detailed specifications including measurements, electrical, and hydraulics.

2.2 Operating Site

2.4 Limitations

Safety Rules and Operating Instructions

3 Safety Rules

Essential safety guidelines to be adhered to during operation.

4.1 Daily Checks

Procedures for essential daily pre-operation checks.

4.2 Disengaging Drive Wheel Brakes

4.4 Entering and Leaving the Work Platform

4.5 Handset Control Unit

Description of the controls and functions available on the handset.

4.6 Base Unit Control Panel

4.7 Emergency Lowering

Procedures for lowering the platform in emergencies.

4.8 Battery Charging

4.9 Driving and Manoeuvring

Instructions on how to drive and steer the platform.

4.10 Extending the Work Platform

Transport, Handling, Storage, and Maintenance

5.2 Loading and Unloading

Procedures for safely loading and unloading the machine.

5.3 Lifting

5.4 Preparation for Transport

6.1 Machine Labelling

6.5 Daily Checks – Operator Checklist

A checklist for daily pre-operation safety checks.