Need help?Do you have a question about the Yousheng JCS-B SERIES and is the answer not in the manual?
To calibrate the scale when moved to a different place.
To choose different function models: Weighing, Counting, Percentum.
To choose different units: kg, lb.
To set high/low limits or sample weights in different modes.
To zero the display or control backlight on/off.
To set the scale to zero after placing a container.
To input numbers and confirm settings.
Includes unit selection, tare, and zero functions within weighing mode.
Configures high limit, low limit, and alarm method.
Covers sampling, counting process, and unit weight errors.
Details percentum sampling and insufficient sample detection.
Explains methods for full range and random load calibration.
Indicates weight exceeding capacity or internal ADC overflow.
Signals when the internal accumulator voltage is low.
Indicates zero weight is outside the permitted range.
Shows if the scale is unstable during startup.
Indicates system errors or incorrect alarm settings.
Sets transmission method (stable, continuous) and baud rate.
Describes frame format and data format for RS232 communication.
To Next Page
General