Ypsomed mylife Unio Neva User Manual

mmol/L
More freedom. More condence. With mylife
™
.
10132357-en-cs/V01 // 101-3GM722-090 // Rev. Date: 2018-02
User guide
Blood glucose monitoring system
Uživatelská příručka
Systém pro měření glykémie

Ypsomed mylife Unio Neva Specifications

General

Display	LCD
Test Strip Type	mylife Unio Test Strips
Measurement Time	5 seconds
Connectivity	Bluetooth
Measurement Method	Electrochemical
Battery Type	CR2032
Measuring Range	20-600 mg/dL
Operating Conditions	10 to 40 °C, 10 to 90% RH

Summary

User Guide and System Introduction

Blood Glucose Monitoring System Overview

Introduction to the mylife™ Unio™ Neva blood glucose monitoring system.

Intended Use of the BGMS

Diagnostic Use and Target Users

Specifies the intended diagnostic use for self-testing and professional surveillance.

Bluetooth® Wireless Technology

Meter Connectivity and App Integration

Explains how the meter uses Bluetooth to connect with smartphones and the mylife™ App.

Bluetooth® Usage Warnings

Single Patient Use and Flight Mode Precautions

Warns about single patient use and the need to turn off Bluetooth in certain locations.

mylife™ Unio™ Neva Meter Overview

Meter Components and Key Functions

Identifies and describes the display, test strip port, and control buttons of the meter.

Initial Setup with Bluetooth® and App

Pairing and Language Selection Steps

Guides through initial start-up, battery tab removal, and language selection.

Bluetooth® Pairing Process

Meter-to-Device Pairing and Code Entry

Details steps for pairing the meter with a mobile device, including code entry.

Pairing Confirmation and Error Handling

Successful Pairing and Error 9 Troubleshooting

Initial Setup Without Bluetooth®

Manual Meter Configuration Process

Outlines the start-up process without Bluetooth, focusing on manual settings.

Date Setting Procedure

Setting Date Format and Value

Time Setting Procedure

Blood Glucose Target Range Configuration

Setting Upper and Lower Target Limits

Details how to set target ranges and enable/disable the function.

Performing a Blood Glucose Measurement

Preparing the Lancing Device

Instructions on removing the cap, inserting a lancet, and removing the protective cover.

Lancing Device Preparation Steps

Depth Adjustment and Hand Hygiene

Covers replacing the cap, choosing penetration depth, and washing hands.

Blood Sample Application

Test Strip Insertion and Blood Application

Guides on inserting the test strip and applying blood to the meter.

Blood Sample Application to Test Strip

Filling the Test Strip Viewing Window

Instructs on applying blood to the strip and handling insufficient sample volume.

Measurement with Bluetooth® Active

Result Interpretation and Icons

Measurement in Flight Mode

Flight Mode Operation and Result Interpretation

Measurement Without Bluetooth® Configuration

Unpaired Meter Measurement Procedure

Bluetooth® Status Symbols and Operation

Interpreting Bluetooth® Icons

Recalling Test Results (Records)

Storing and Accessing Past Measurements

Recalling Average Test Results (Averages)

Calculating Averages Over Different Periods

Setting Alarms

Configuring Individual Alarms

Alarm Configuration Steps

Setting Alarm Time and Repeatability

Wireless and Device Management Settings

Managing Bluetooth® Connections

Adding and Pairing New Devices

Steps for Device Pairing and Code Entry

Date and Time Settings

Selecting Date Format and Setting the Date

Time Setting Details

Setting Time Format and Value

Blood Glucose Target Range Setting

Configuring Upper and Lower Target Limits

Details setting target ranges and enabling/disabling the function.

Quality Control Testing

Performing Control Tests with Control Solution

Explains the importance and procedure for performing quality control tests.

Control Solution Test Ranges

Understanding Normal and High Control Ranges

Initiating a Control Test

Selecting Control Test from Menu

Guides on how to start a control test from the meter's main menu.

Control Test Execution - Step 1

Inserting Strip and Recognizing Control Solution

Details inserting the test strip and waiting for the 'Recognising' symbol.

Control Test Execution - Step 2

Applying Control Solution to Test Strip

Explains how to apply the control solution drop to the test strip.

Control Test Result Interpretation

Comparing Control Results with Ranges

Describes interpreting control test results and comparing them to the ranges.

Troubleshooting Out-of-Range Control Results

Identifying Causes for Invalid Control Tests

Control Test Best Practices

Avoiding Contamination and Proper Handling

Data Management Options

Transferring Data via USB or Bluetooth®

Battery Change Procedure

Replacing Meter Batteries

Details the process of changing the batteries in the mylife™ Unio™ Neva meter.

Installing New Batteries

Correct Battery Insertion and Orientation

Illustrates removing old batteries and correctly inserting new CR2032 batteries.

Completing Battery Replacement

Closing Cover and Resetting Settings

Resetting Meter After Battery Change

Re-establishing Bluetooth® Pairings

Test Strip Handling and Storage

Vial Management and Storage Conditions

Test Strip Usage Precautions

Correct Blood Sample Application

General Precautions

Safety and Proper Usage Guidelines

Blood Sample Volume Requirements

Minimum Sample Size and Handling

Limitations of the Meter

Factors Affecting Test Accuracy

Lists factors like altitude, dehydration, substance concentrations, temperature variations affecting results.

Meter Usage Environment and Safety

Avoiding Interference and Maintaining Cleanliness

Error Messages and Troubleshooting

Error 1: Used or New Strip Issues

Explains error messages related to using a used test strip or inserting a new one.

Troubleshooting Signal and Quantity Errors

Error 3: Signal Failure, Error 4: Low Blood Quantity

Details error messages for signal failure and insufficient blood sample quantity.

Troubleshooting Code and Battery Errors

Error 5: Code Error, Error 6: Battery Low

Explains error messages for code errors, strip issues, and low battery status.

Troubleshooting Temperature and Sampling Errors

Error 7: Temperature Issues, Error 8: Sampling Error

Covers error messages for operating temperature and sampling errors.

Troubleshooting Pairing and Device Limits

Error 9: Pairing Timeout, Error 10: Max Devices

Explains errors for pairing timeouts, incorrect passcodes, and exceeding device limits.

Customer Service Contact Information

Regional Customer Service Details