yt 1312 yt
EN
Airsprung forks and shocks have
to be lled with the correct air pres-
sure before use! That’s why we have
included a shock pump to your
package: Please read the manu-
facturer manuals to learn how it
works.
6.1
FOX / ROCKSHOX
FRONT WHEEL ASSEMBLYFRONT WHEEL ASSEMBLY
PREPARING
Unscrew and remove the quick release axle
from the fork.
Insert the front wheel in the fork dropouts.
Make sure the brake rotor is centered in the
brake caliper to avoid damages.
Insert the slightly lubed quick release axle into
the fork from the drive side (RockShox) or the
non-drive side (FOX) until the very end and
tighten it clockwise afterwards.
Close the quick release lever to ensure the
tight t of the front wheel. Do not use any
tools to increase the leverage, close it rmly
by hand. The mechanism comes preadjust-
ed: Once you close the lever so it is pointed
alongside the fork stanchions the wheel is
secured. Please read the manufacturer’s
manual.
Remove the front axle stand from the front
wheel axle.
Pull the spacer out of the brake caliper. Please
keep it for future bike transports.
Remove the cardboard packaging of both
wheels.
6.3
7.3
6.4
7.1 7.2
6.2
To Next Page
Loading...
