Need help?Do you have a question about the YT CAPRA and is the answer not in the manual?
General| Suspension Type | Full Suspension |
|---|---|
| Category | Enduro |
| Wheel Size | 29" or 27.5" |
| Fork Travel | 170mm |
| Rear Shock Travel | 170mm |
| Drivetrain | 1x12 |
| Brake Type | Hydraulic Disc |
| Tire Width | 2.4" - 2.6" |
| Seatpost | Dropper |
| Frame Material | Carbon |
Lists major frame parts with numerical labels for identification.
Identifies parts of the suspension fork with lettered labels.
Lists wheel and tire components with labels.
Welcomes the user and sets expectations for assembly skills and tool requirements.
Provides crucial safety warnings regarding self-assembly, maintenance, and seeking professional help.
Offers advice on saving packaging and provides contact details for support.
Details the steps for opening the bicycle packaging box.
Guides on how to carefully remove the wheels from the box.
Explains how to lift and position the bicycle frame after unpacking.
Step-by-step guide on mounting the handlebar onto the stem, including torque specs.
Instructs on cutting ties and removing packaging for the wheels.
Details how to open, lock, mount, and tighten the rear derailleur.
Guides on inserting the rear wheel and using the assembly stand correctly.
Verifies the current assembly progress against an image.
Step-by-step guide for installing the front wheel on RockShox Pike forks.
Step-by-step guide for installing the front wheel on Bos Deville forks.
Explains how to prepare and install pedals, noting thread direction and torque.
Details how to adjust brake levers and shifters for optimal positioning.
Confirms the bike is fully assembled and provides information for final adjustments.
Guides on adjusting rear shock and suspension fork based on rider weight and manufacturer specs.
Explains 'sag' and how rider weight influences suspension settings.
Advises familiarizing with the bike, checking torques, and understanding brake performance.
Lists pre-ride checks for safety and component integrity.
Details essential checks for seatpost, wheels, brakes, and overall stability.
Instructs on post-fall checks for damage and potential component failure.
Provides information on road regulations and compliance for German and international use.
Outlines approved usage and limitations, covering maintenance and weight limits.
Covers liability, safety gear recommendations, and professional maintenance advice.
Details initial, monthly, and annual inspection and maintenance tasks.
Emphasizes knowledge of carbon material properties and risks of damage.
Notes that frame manufacturing is handmade, leading to potential finish variations.
Provides guidelines on avoiding clamping, using correct assembly paste, and handling components.
Advises on cleaning methods, approved cleaners, and avoiding solvents.
Explains protective foils and recommends regular checks and replacement.
Lists recommended torque values for various bike components during assembly and maintenance.
To Next Page
