YT IZZO 2020 - Page 9

yt 1716 yt
EN
IT
´
S
DONE
Brake caliper screw to frame and fork
9,5 Nm
Shifter
2,5 – 4 Nm
Disc brake bolts to hub
6 Nm
Rear derailleur (xing bolt)
11 Nm
Rear derailleur (clamp bolt)
4 – 5 Nm
Brake lever
2,8 – 3,4 Nm
Cassette retainer ring
40 Nm
Handlebar clamp
5 – 7 Nm (e13) / 5 Nm (turbine) / 6 Nm (aeffect)
Stem (steerer tube clamping)
5 – 7 Nm (e13) / 5 Nm (turbine) / 8 Nm (aeffect)
Crank bolts
48 – 54 Nm
Chain ring bolts
12 – 14 Nm (Steel)
8 – 9 Nm (Aluminum)
Pedals
38 Nm
Lock-on grip bolts
2,5 – 4 Nm
Shock bolts
10 – 12 Nm
TORQUES
CAUTION!
These specications are only guidelines. As a rule, you should always observe the manufacturers’
instructions. These have also been included or can be found on the website of the respective
manufacturer.