Need help?Do you have a question about the Ytc YT-1000 series and is the answer not in the manual?
General| Brand | Ytc |
|---|---|
| Model | YT-1000 series |
| Category | Controller |
| Language | English |
Provides general information about the product and manual usage guidelines.
Details the warranty terms, coverage, and limitations for the product.
Highlights critical safety warnings for explosion-proof type positioners.
Offers a brief overview of the YT-1000 / 1050 series electro-pneumatic positioner.
Lists key features and operational functions of the positioner.
Explains the meaning of various labels and markings on the product.
Details how product numbers are formed using suffix symbols for different models.
Presents detailed technical specifications for YT-1000 and YT-1050 models.
Lists and describes the various certifications obtained by the product.
Illustrates the different parts and assembly of the YT-1000L and YT-1050L models.
Provides dimensional drawings and measurements for various positioner models.
Explains the operational principle of the linear positioner with diagrams.
Describes the working principle of the rotary positioner with diagrams.
Outlines essential safety instructions to follow during installation.
Lists the necessary tools required for installing the positioner.
Guides the installation process for linear positioner models.
Provides instructions for installing rotary positioner models.
Details safety precautions related to air connection and supply.
Specifies requirements for clean, dry air supply pressure.
Covers guidelines for proper piping installation and conditions.
Explains how to connect the positioner's air ports to the actuator.
General guidelines for electrical connections to the positioner.
Safety and connection procedures for flameproof enclosure types.
Safety and connection procedures for intrinsic safety type circuits.
Describes the connection and configuration for internal SPTM without LCD.
Details the connection and configuration for internal SPTM with LCD.
Explains connection for internal Limit Switch and SPTM without LCD.
Guides on setting the Direct Acting (DA) or Reverse Acting (RA) mode.
Instructions for adjusting the zero point of the positioner.
Procedures for adjusting the span of the positioner.
How to adjust internal limit switches for the positioner.
Instructions for adjusting the Auto/Manual switch.
Details on installing orifices to prevent hunting.
Steps for resetting and recalibrating the potentiometer.
Maintenance procedures for the pilot valve component.
Recommendations for checking and replacing seals.
To Next Page
