Need help?Do you have a question about the Ytc YT-1000L and is the answer not in the manual?
Outlines essential safety measures to follow before and during installation.
Instructions for adjusting the cam for direct or reverse action.
Guides on setting the zero point and span for the positioner.
Steps for adjusting and recalibrating the potentiometer.
Provides instructions for performing maintenance on the pilot relay valve.
Diagnoses and resolves issues where the positioner does not respond.
Troubleshoots problems related to pressure exhaust and response.
Addresses issues causing hunting and poor linearity in operation.
General| Type | Pneumatic |
|---|---|
| Temperature Limits | -20°C to +80°C |
| Ambient Temperature | -20°C to +80°C |
| Input Signal | 3-15 psi |
| Supply Pressure | 20-100 psi |
| Material | Aluminum |
| Connection | 1/4" NPT |
| Linearity | ±1% F.S. |
To Next Page
