Yuasa YUA2AMPCH User Manual

English
- 14 -
1.
Problem: No LED l i t .
Possible Cause: AC end is not making a good
connection.
Solution: Check for poor connection at AC side.
2.
Problem: Green LED keeps blinking.
Possible Cause: Clamps are not making a good
connection.
Solution: Check for poor connection at battery
and
frame .
3.
Problem: Red LED illuminated right away when
connecting onto a battery.
Possible Cause:
a.
Incorrect battery voltage.
b.
Battery is at full charge capacity
Solution:
a.
Verify that charger selector switch is in
correct 6V or 12V position to match the
battery’s
voltage. The charger will give you
a
warning if you are connecting to the incorrect
application.
b. The battery is currently at full charge and
will continue
in maintenance/float mode until
voltage drop occurs.
At the time of voltage,
drop,
charger will resume in maintenance, charging
mode
TROUBLESHOOTING

Yuasa YUA2AMPCH Specifications

General

Brand	Yuasa
Model	YUA2AMPCH
Category	Battery Charger
Language	English