J4:
2 channel current inputs of 0-12mA,
4-20mA, 0-20mA etc.
√ √ √
J5:
2 channel two-wires transmitter
provided 24VDC power supply.
√ √ √
I5: 2 channel on-off signal inputs √ √ √
L1:
Single relay contact (NO+NC) output.
(30VDC/2A, 264VAC/2A)
√ √ √
L2:
Single relay contact (NO+NC) output.
(30VDC/1A, 264VAC/1A)
√ √ √
L4:
Single relay contact (NO+ NC) output.
(30VDC/2A, 264VAC/2A)
√ √ √
L5:
Dual relay contact (NO) outputs.
(30VDC/2A, 264VAC/2A)
√ √ √
W1:
1 channel Thyristor normal open
output.
(“never burn out” technology, able to
stand 0.3A continuous current or 1A
transient current)
√ √ √
G: 1 SSR voltage output (12VDC/30mA) √ √ √
G5: 2 SSR voltage outputs (12VDC/30mA) √ √ √
S: Photoelectric isolated RS485 interface √
S4:
Photoelectric isolated RS485 interface
with isolated power supply.
√
X3:
Photoelectric isolated linear current
output
√ √
X5:
Photoelectric isolated linear current
output with its own isolated power
supply.
√ √
V5:
Photoelectric isolated 5VDC/50mA
power supply for transmitter.
√ √
V10:
Photoelectric isolated 10VDC/50mA
power supply for transmitter.
√ √
V12:
Photoelectric isolated 12VDC/50mA
power supply for transmitter.
√ √
V24:
Photoelectric isolated 24VDC/50mA
power supply for transmitter.
√ √
⑨ Shows power supply: Null indicates 100～240VAC power supply, and “24VDC” indicates
20～32VDC/AC power.
To Next Page
Loading...