z Temperature drift :
≤0.01%FS/℃ (typical 50ppm/℃)
z Electromagnetic compatibility:
IEC61000-4-4, ±4KV/5KHz; IEC61000-4-5, 4KV
z Isolation withstanding voltage:
Between power, relay contact and signal terminals ≥ 2300VDC;
Between isolated eletroweak signal terminals ≥ 600VDC
z Response time：
≤1.5 seconds（if digital filter parameter is set as 0 or 1）
z Automatic pilot time interval：
Approx. 1.2s or 2s configurable
z Alarm function：
High and low alarm，configurable separately for each channel
z Alarm output:
Relay contact output（NO or NC）：250VAC/1A or 30VDC/1A
No contact discrete output（NO or NC）：250VAC/0.3A(transient current 1A)
z Power supply:
100~240VAC/50Hz, 24VDC
z Power consumption：≤6W
z Work ambience：Temperature -10~+60℃, humidity ≤ 90%RH
To Next Page
Loading...