Need help?Do you have a question about the Yuga CLM920_AC3 and is the answer not in the manual?
Lists key physical and functional features of the CLM920 AC3 module.
Details module interface specifications, including pin distribution and definitions.
Discusses power supply design, reference circuits, and voltage output.
Covers module boot, shutdown procedures, and reset control mechanisms.
Details the USB interface, its protocol, and application circuit.
Explains the main and debug serial ports, including signal definitions and usage.
Covers USIM card interface, reference circuits, and hot-swap detection.
Covers antenna interfaces, matching circuits, and RF trace references.
Lists 3G and 4G RF performance indicators for sensitivity and power.
Outlines important safety guidelines and precautions for using the wireless device.
General| Model | CLM920_AC3 |
|---|---|
| Operating Temperature | -40°C to +85°C |
| Modulation | QPSK, 16QAM |
| GNSS | GPS, GLONASS, BeiDou, Galileo |
| Interfaces | UART, GPIO |
| Transmit Power | 23dBm |
| Dimensions | 2.5mm |
| LTE Bands | B1/B3/B5/B8/B20/B28 |
To Next Page