To Next PageTo Next PageWhat to do if my Yukon Eagle Furnace has low air circulation?
If you're experiencing insufficient air circulation from your Yukon Eagle Furnace, the first step is to inspect the air filter. Clean or replace it as needed. Next, check all registers and grilles to ensure they are fully open and not blocked by any obstructions such as carpets, draperies, or furniture. Also, check the supply or damper positions.
General| Brand | Yukon Eagle |
|---|---|
| Model | Oil Furnace |
| Category | Furnace |
| Language | English |
Crucial safety precautions for furnace operation and handling.
Comprehensive safety guidelines and adherence to NFPA standards.
Instructions for inspecting shipment and identifying all furnace components.
Detailed description of key features and benefits of the Eagle I Husky model.
Detailed description of key features and benefits of the Eagle II Polar model.
Technical specifications including BTU ratings, dimensions, and component details for all models.
Guidance on planning the furnace installation, including safety rules and location.
Critical clearance requirements to ensure safe installation around combustible materials.
Step-by-step instructions for placing the furnace and installing primary components.
Procedures for installing either the oil or gas burner assembly.
Instructions for installing the draw collar and DS-103 damper control unit.
Guidance on checking and properly installing the furnace smoke baffles.
Procedure for mounting and installing the Honeywell fan/limit control.
Guidelines for mounting thermostats for optimal room temperature control.
Requirements and guidelines for installing fuel tanks and associated lines.
Procedures and safety considerations for installing gas piping.
Steps for installing the fume sensor on gas models.
Details on wiring the furnace, including transformer, controls, and thermostat connections.
Guidelines for connecting the smoke pipe and ensuring proper chimney function.
Instructions for installing and setting the barometric draft control.
Guidelines for selecting and installing appropriate chimneys according to codes.
Instructions for providing adequate fresh air for proper furnace combustion.
Guidance on furnace placement and determining fresh air duct sizes.
Schematics detailing 24-volt field wiring for various heating configurations.
Schematic for wiring the furnace for oil and wood heating operation only.
Schematic for wiring the furnace for gas and wood heating operation only.
Steps for starting and operating the furnace using oil as fuel.
Steps for starting and operating the furnace using gas as fuel.
Guidance on selecting and using different types of wood for efficient burning.
Instructions for starting and managing a wood fire in the furnace.
Instructions on selecting, starting, and maintaining a coal fire.
Procedures for grate care, ash disposal, and proper coal storage.
Routine cleaning of internal components to maintain efficiency and prevent issues.
Steps for adjusting the furnace blower for optimal air circulation and temperature rise.
Guidance on sizing duct work and adjusting blower speed for efficient operation.
Methods for testing furnace efficiency using draft and CO2 measurements.
Specific instructions for placing firebricks in the furnace combustion chamber.
Recommended maintenance tasks for the oil burner and air filter.
Information on preventing rust and safely removing creosote buildup.
Troubleshooting common smoke issues and identifying chimney-related causes.
Strategies to address furnace overheating or if the unit is oversized for the home.
Visual representation of the Eagle I Husky furnace components.
A detailed list of part numbers and descriptions for the Eagle I Husky model.
Visual representation of the Eagle II Polar furnace components.
A detailed list of part numbers and descriptions for the Eagle II Polar model.
Visual representation of the Wayne MSR oil burner components.
A list of part numbers and descriptions for the Wayne MSR oil burner.
Visual representation of the Wayne P250AF-DIN gas burner components.
A list of part numbers and descriptions for the Wayne P250AF-DIN gas burner.
Performance curves for circulating fans used in LWO-112 and LWG-112 models.
Common problems and solutions for oil-fired furnace operation.
Common problems and solutions for gas-fired furnace operation.
