Page 9For technical questions, please call 1-888-866-5797.Item 58832
SAFETYOPERATIONMAINTENANCE SETUP
Operation Instructions
1. Place Anvil Pegs (20) into Vise (4) slots and Table
Top (2) slots to firmly hold work piece into position.
Anvil Pegs can be used with Wood Pegs (19).
Anvil Pegs (20)
2. Place Wood Pegs into Vise slots and Table
Top slots to firmly hold work piece into position.
Wood Pegs can be used with Anvil Pegs.
Wood Pegs (19)
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet
before performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1. BEFORE EACH USE, inspect the general
condition of the Workbench. Check for:
• loose hardware
• misalignment or binding of parts
• cracked or broken parts
• any other condition that may
affect its safe operation.
2. AFTER USE, wipe external surfaces of
the Workbench with clean cloth.
To Next Page
Loading...