BLACKSTONE - UPPER
BLACKSTONE - LOWER
CHAR-BROIL
Caddy (x1)
Bottle Holder
Insert (x1)
Universal Mounting Brackets (x2)
Hooks (x3) Allen Key (x1) Allen Screws (x2) Optional Phillips
Screws (x2)
Align the lip of the Caddy with the front of the shelf.
Hang Mounting Brackets on underside of Char-Broil shelf.
Thread Allen Screws (or Optional Phillips Screws) into Mounting
Brackets using the bottom holes in the Caddy. Tighten Screws.
Install Hooks on underside of Caddy by rotating them into place.
Place Bottle Holder Insert into Caddy.
KIT INCLUDES:
INSTRUCTIONS:
Char-Broil Grill*
To Next Page
General