YUNEEC E90 User Manual

Step 1.
Switch on the ST16S followed by the H520 aircraft.
Step 2.
Tap the [ ] on the top right corner onthemain
interfaceofST16S.
Binding the E90
Select Vehicle to Connect
NO CAMERA
E90-821BFA
Fly
Takeoff
RTL
Pause
Action
Reset All Links
Close
Not Connected
N/A
75%
GPS
Cancel
ok
Please enter password for E90-821BFA
NO CAMERA
E90-821BFA
Fly
Takeoff
RTL
Pause
Action
Reset All Links
Close
Not Connected
N/A
75%
GPS
NO CAMERA
Fly
Takeoff
RTL
Pause
Action
Not Connected
N/A
75%
GPS
NOTICE
If the connection process is delayed, close the pop
up window and then repeat the above steps.
Step 3.
Tap the serial number of the E90 when the following
window pops up. (If multiple Yuneec UAS are used,
check the ID number on the side of each camera to
assure correct camera selection/binding).
Step 4.
Using the password “1234567890”, authorize the
camera and tap "OK" to confirm.

YUNEEC E90 Specifications

General

Brand	YUNEEC
Model	E90
Category	Security Camera
Language	English