Yunmai Pro - Maintenance

4
Important
• YUNMAI Smart Scale should not be used to diagnose or treat any medical
situation.
• Do not disassemble, squeeze, puncture the product or put it into water, fire or
exposes it to temperature higher than 60° (140°F).
Notice before use
• Please ignore the first weighing reading at your first time use or after moving the
scale.
• After scale power on or reset, please wait for the LED display flash "" • "" for
several seconds, and then start your weigh-in.
• After each move of the scale, please wait for 5 seconds for the sensor to self-
recalibrate with the floor, and then weigh for accurate reading.
Note
• Following groups may not get accurate results:
• Juveniles
• Professional athletes
• Pregnant women
• Users with Cardiac Pacemaker device
Weighing Notice
• Do not weigh during charging.
• The scale surface may become slippery in humid places, please watch your steps.
• Before meal or before bath is the most recommend time for weighing, because
eating and bathing may affect the body moisture
• and temperature ,which might affect the sensor accuracy."
• Recommend to weigh yourself at the same time and same condition in each day
for more accurate data record.
Maintenance
• Use a damp cloth to wipe the surface of the scale.
• Do not use any detergent to clean the scale, because detergent might damage
the ITO conductive coating which may affect the accuracy of detecting body
fat data