To Next PageTo Next PageWhat to do if my Yuwell BreathCare YH-360CPAP Respiratory Product humidifier tank leaks?
If the humidifier tank leaks, it might be assembled incorrectly or damaged. First, check if the humidifier tank is assembled correctly, and reassemble it according to the user's manual. If the issue persists, inspect the humidifier tank for any damage, and replace it with a new one if damage is found.
Why is the screen blank on my Yuwell Respiratory Product?
A blank screen can occur if the power supply is not connected properly. Ensure the power supply is correctly connected and that there is good contact. You can also press any key to attempt to light up the screen.
General| Brand | Yuwell |
|---|---|
| Model | BreathCare YH-360CPAP |
| Category | Respiratory Product |
| Language | English |
Details on accessing sleep report summaries like AHI, Used time, and Average pressure.
Instructions on selecting therapy mode (CPAP or APAP) via the clinical menu.
Steps to adjust initial pressure and therapy pressure settings in the clinical menu.
How to select between cmH2O or hPa as the pressure unit in the clinical menu.
Guide to selecting the FPS Level (0-3) within the clinical menu settings.
Step-by-step guide to safely disassemble the PAP device for cleaning and maintenance.
Checks for cracks or seal damage in the humidifier tank and its replacement.
Instructions to inspect the air hose for damage or cracks and replace if necessary.
Procedure for weekly inspection of the air filter and recommendation for replacement.
Guide on how to remove the old filter cotton and install a new one.
Instructions for inserting and using the Micro-SD card to read and write therapy data.
Critical safety information including life-support, mask usage, power lines, and avoiding disassembly.
Specifications for input voltage, frequency, and allowable tolerances for the power supply.
Operating and storage temperature and humidity ranges, and atmospheric pressure.
Information on electromagnetic compatibility requirements and potential interference.
Symbols related to safety warnings, operational instructions, and device classification.
Symbols for environmental disposal and potential burn hazards.
List of conditions not covered by the product warranty, such as misuse or unauthorized repair.
