To Next PageTo Next PageWhat to do if my Yuwell BreathCare YH-580APAP Respiratory Product humidifier tank leaks?
If the humidifier tank leaks, it might be assembled incorrectly or damaged. First, check if the humidifier tank is assembled correctly, and reassemble it according to the user's manual. If the issue persists, inspect the humidifier tank for any damage, and replace it with a new one if damage is found.
Why is the screen blank on my Yuwell BreathCare YH-580APAP?
A blank screen can occur if the power supply is not connected properly. Ensure the power supply is correctly connected and that there is good contact. You can also press any key to attempt to light up the screen.
General| Pressure Range | 4-20 cmH2O |
|---|---|
| Data Storage | SD Card |
| Mask Disconnect Alarm | Yes |
| Therapy Mode | CPAP, APAP |
| Humidifier | Integrated |
| Screen | LCD display |
| Power Supply | 100-240V AC, 50/60Hz |
| Type | APAP (Auto-Adjusting Positive Airway Pressure) |
Guides users through the essential steps for installing the PAP device.
Explains how to initiate and terminate the therapy session using the device.
Explains how to adjust the Ramp setting and heated humidifier level for comfort.
Procedure for selecting therapy mode and setting pressure parameters.
Guides on adjusting ramp time and humidity level within the clinical menu.
Important safety warnings regarding power, mask usage, and device handling.
