Z-BEAST FINISH MOWER 48ZB

To Next Page

Owner’s Manual

This manual contains important safety instructions for the gasoline engine powered

lawnmower models: 48ZB

READ SAFETY WARNINGS AND OPERATING INSTRUCTIONS CAREFULLY.

SAVE THIS MANUAL.

When you call the help-line you will need to have the following information:

Date of Purchase: _______________________

Location of Purchase: _______________________

Serial # - Mower: _______________________

Serial # - Engine: _______________________

Serial # - Hydro Trans (L) _______________________

Serial # - Hydro Trans (R) _______________________

Mower and engine life are

extended greatly by performing

frequent lubrications, oil changes

and regular maintenance. To

protect your investment perform

routine maintenance.

FINISH MOWER by

Need Help?

Parts, Service

and Technical Assistance call:

1-919-550-3221

www.beastpowerequipment.com

Need help?

Do you have a question about the Z-BEAST FINISH MOWER 48ZB and is the answer not in the manual?

Summary

Safety Information and Warnings

Preparation Safety Precautions

Fuel Safety Precautions

Safe handling and storage of gasoline and other fuels.

Operation Safety Precautions

Equipment Operation Safety

Safety guidelines for operating mower components and systems.

Slope Operation Safety

Precautions for operating the mower on slopes and inclines.

Safety Decal Identification

Control Panel and Lawn Mower Components

Operating Instructions

Starting the Engine

Step-by-step guide for starting the mower engine safely.

Operating the Mower

Instructions for driving and maneuvering the mower.

Changing the Height of Cut

Procedure for adjusting the mower deck cutting height.

Mowing Operations

Steps and safety for performing mowing operations.

General Maintenance

Service Adjustments

Engine-to-Blade Belt Adjustment

Steps to adjust the belt tension between the engine and blades.

Removing and Installing Blades

Procedure for removing and reinstalling mower blades.

Engine-to-Hydrostatic Drives Belt Adjustment

Adjusting the belt tension for hydrostatic drives.

Safety System Adjustments

Adjusting the sensitivity and location of safety switches.

Lubrication Points

Troubleshooting

Engine Starting Problems

Common causes and solutions for engine starting issues.

Engine Running Problems

Troubleshooting for engine stopping or running issues.

Blade Engagement Issues

Resolving problems with the engine stopping when blades engage.

Blade Rotation Issues

Mower Movement Issues

Engine Overheating

Cutting Quality Issues

Mower Pulling Issues

Limited Warranty & Service