Z-CAM E2 Flagship Series Quick Start Guide

3. Select the one you want and press OK button to start it. PLEASE WAIT
until the calibration processing is finished and DO NOT INTERRUPT IT!
Note that the Sensor Calibration will take about 2 minutes, and Hot Pixel
Calibration will take 5-30 minutes for Z CAM E2 and 5-10 minutes for Z
CAM E2 Flagship series.
4. The camera will reboot automatically after the calibration is finished.
Suggestions
1. For Z CAM E2, if you want to do the camera calibration for WDR mode,
you should run the Sensor Calibration for each resolution individually
with WDR mode enabled.
2. If there is new resolution after firmware update, you can run Sensor
Calibration for the new resolution.

Z-CAM E2 Flagship Series Specifications

General

Brand	Z-CAM
Model	E2 Flagship Series
Category	Digital Camera
Language	English