24
C. Drying your room
Press the MODE button on the control panel or remote control, and the
dry indicator lights up. The fan speed is unable to select. The user
should connect the hose to the drain outlet at the bottom of the unit.
Note: In this mode, the fan speed switches over to low speed and cannot
be selected.
D. Sleep mode
（
this function can only be used with
remote control
）
The sleep mode can be activated when in cool mode.
In cool mode :
After 1 hour the preset temperature is increased by 2℉, after another
hour the preset temperature will again be increased by 2℉.
To Next Page
Loading...
