Zagg HALO BOLT ACDC MAX

To Next Page

SAFETY PRECAUTIONS/MOVING

AND STORAGE INSTRUCTIONS

DANGER-CAUTION Read and understand all safety information

before using this product. Failure to follow these instructions may

result in electrical shock, explosion, re which may result in serious

injuries, death or property damage.

• When used correctly, lithium- ion rechargeable batteries provide a

safe and dependable source of portable power. However, if they are

misused or abused, this may result in leakage, burns, re or explosion,

causing personal injury or damage to other devices.

• Misusing or incorrectly connecting your HALO BOLT ACDC MAX may

cause electric shock to users and damage equipment.

• Do not operate in explosive atmospheres such as in the presence of

ammable liquids, gases or dust.

• Remove jump start clamps from vehicle battery after jump starting vehicle.

• Keep your HALO BOLT ACDC MAX dry and away from moisture and

corrosive materials. The HALO BOLT ACDC MAX should not be used

near water or wet areas such as bathtubs, showers, bathrooms, sinks,

swimming pools or basements.

• Do not expose your HALO BOLT ACDC MAX to moisture, water, rain, or

snow.

• Keep your HALO BOLT ACDC MAX away from heat sources, including

open ames, radiators, stoves, ovens, and any other devices that

product heat.

• The lithium-ion rechargeable battery used in this charging device may

present a risk of re or chemical burn if mistreated. Do not expose to

re or excessive temperature. Do not expose to heat above 212°F

(100°C) or incinerate.

• In the unlikely event of leakage or explosion use sand or a chemical

re extinguisher. If contact accidentally occurs, ush with water. If

liquid contacts eyes, additionally seek medical help. Liquid ejected

from the battery may cause irritation or burns.

• Your HALO BOLT ACDC MAX may become warm under extended high

power operation. Do not cover, wrap, or otherwise restrict the

HALO BOLT ACDC MAX during operation.

• Do not disassemble your HALO BOLT ACDC MAX. There are no user-

serviceable parts inside. Incorrect reassembly may result in shock

or re hazard.

• Do not drop or subject to strong impacts. Do not operate your

HALO BOLT ACDC MAX if it has received a sharp blow, or has otherwise

been damaged in any way.

• Do not puncture, crush or subject to mechanical shock.

• Only charge your HALO BOLT ACDC MAX by the specied method

with the specied charging adapter provided with the unit. Use of an

attachment not recommended or sold by power pack manufacturer

may result in a risk of re, electric shock, or injury to persons.

• Do not use any non-HALO-branded accessories with the

HALO BOLT ACDC MAX. Doing so may cause electric shock to users and

damage equipment.

• Do not operate the power pack with a damaged cord or plug, or a

damaged output cable.

• The HALO BOLT ACDC MAX , along with its accessories, are not toys

and should be kept away from children.

• To reduce risk of damage to the electric plug and cord, pull the plug

rather than the cord when disconnecting the power pack.

• Make sure the jumper cables are fully plugged into the jump start

output before trying to jumpstart your vehicle.

• Do not touch red (positive) and black (negative) jumper clamps

together at any point.

• Do not insert any foreign object into the ports or openings of your

HALO BOLT ACDC MAX .

• Do not clean your HALO BOLT ACDC MAX with harsh chemicals, soaps

or detergents. Just wipe the case with a soft cloth.

• When charging the internal battery, work in a well ventilated area and

do not restrict ventilation in any way.

• Make sure the HALO BOLT ACDC MAX’s charging ports do not become

OPERATING/INSTALLATION INSTRUCTIONS

Charging your HALO BOLT ACDC MAX.

To charge your HALO BOLT ACDC MAX, use the provided Wall Charging

Adapter, and plug the DC jack into the charging put. Next, connect the

wall charging adapter into a wall outlet. The HALO BOLT ACDC MAX will

automatically begin charging. When the HALO BOLT ACDC MAX is fully

charged, all ve battery indicator bars will be solid green and the digital

screen will indicate 100% charged. (This could take up to 9 hours).

While charging, the digital screen will illustrate the charge percentage

of the HALO BOLT ACDC MAX. When fully charged, disconnect the

cable.

NOTE:

The HALO BOLT ACDC MAX is designed to charge between 32°F-113°F

(0-45° C). A "TEMP" indicator will be illustrated on the digital display if

the HALO BOLT ACDC MAX is attempted to be charged outside of this

temperature range.

JUMP STARTING YOUR VEHICLE WITH

THE HALO BOLT ACDC MAX

1. Plug the jumper cables into the jump start output on the

HALO BOLT ACDC MAX.

2. Attach the jumper cable clamps to the vehicle battery.

- Red clamp on positive terminal (+)

- Black clamp on negative terminal (-)

CHARGING AN ELECTRONIC DEVICE USING

5V/2.4A USB OUTPUT PORT

1. Connect the USB-C tip of the supplied USB-C cable into the

USB-C input of your electronic device and connect the Standard

USB end of the supplied USB-C cable into either one of the

HALO BOLT ACDC MAX USB 5V/2.4A Output ports.

2. Turn on the USB charging by pressing the

USB Power ON/OFF Button on the HALO BOLT ACDC MAX.

SPECIFICATIONS

Battery Pack Energy: Containing a 55500 mWh internal battery

Jump Start: 12V/600Amps

Input: 14V/0.85A

USB Output: 2x USB 5V/2.4A

Dimensions: 3.82 x 7.17 x 1.6 inches

Weight: 1.66 lbs

Operating Temperature (During Charging) 32°F - 113°F (0°C - 45°C)

Operating Temperature 14°F - 122°F (-10°C - 50°C)

COMPLIANCE WITH FCC REGULATION

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may

cause undesired operation.

NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment o and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: To comply with the limits of the Class B digital device,

pursuant to Part 15 of the FCC Rules, this device must be used with

certied peripherals and shielded cables. All peripherals must be

shielded and grounded. Operation with non-certied peripherals or

non-shielded cables may result in interference to radio or reception.

LIMITED WARRANTY

At HALO, we are dedicated to making the best quality products. To back

this up, this product is warranted for 90 days. For full details regarding

warranty terms, exclusions and limitations, please visit:

ZAGG.com/warranty. This warranty does not aect any statutory rights

that you may be entitled to. Keep a copy of your purchase receipt as

proof of purchase.

HALO SMART CHARGE TECHNOLOGY

Your HALO BOLT ACDC MAX contains the HALO SMART CHARGE

TECHNOLOGY to achieve higher compatibility for charging standard 5V

USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will

allow the HALO BOLT ACDC MAX to communicate with your electronic

device and provide the fastest and safest charge for that device.

COMPATIBILITY

Standard 5V USB electronic devices including: Mobile phones, Tablets,

PSP, NDS, MP3, MP4, MP5, GPS, Cameras, and more.

USING YOUR HALO BOLT ACDC MAX FLOODLIGHT

The oodlight can be turned on and o by simply pressing and

releasing the oodlight ON/OFF button. The rst press will turn on the

oodlight. Second press will turn on the red emergency light. Third

press will turn on SOS ashing red light. The oodlight will

automatically turn o after 2 hours of inactivity.

JUMP START TROUBLESHOOTING TIPS

3. Press the “Jump Start” button and wait for solid green light.

4. Start your vehicle.

5. Disconnect the jumper cable clamps from the car battery.

TABLE OF CONTENTS

Safety Precautions/Moving And Storage Instructions

Included Items

Operating/Installation Instructions

Troubleshooting Guide/User Maintenance Instructions

Specications

Warranty and Contact Information

PLEASE READ BEFORE OPERATING THIS EQUIPMENT

contaminated with lint or other debris. Use a canned-air type of

product periodically to ensure that the port openings are clear.

• Batteries should be recycled or disposed of as per state and

local guidelines.

• Storage: -4°F – 158°F (-20°C – 70°C), Discharge: 14°F – 122°F

(-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)

Main Page

Need help?

Do you have a question about the Zagg HALO BOLT ACDC MAX and is the answer not in the manual?

The HALO BOLT ACDC MAX is a portable power pack designed for jump-starting vehicles, charging laptops, and powering various electronic devices via USB and AC outputs. It incorporates HALO SMART CHARGE TECHNOLOGY for optimized charging of compatible devices.

Function Description:

The HALO BOLT ACDC MAX serves multiple functions:

Vehicle Jump Starter: It can jump-start a vehicle with a dead battery using the provided jumper cables. The device features a "Jump Start" button and a digital screen that displays vehicle battery voltage and safety indicators.
Laptop Charger (AC Output): It provides an AC output port to charge laptops and other electronic devices rated at 65 watts or less.
Electronic Device Charger (USB Output): It has two USB 5V/2.4A output ports for charging mobile phones, tablets, gaming devices (PSP, NDS), MP3/MP4/MP5 players, GPS devices, cameras, and more.
Floodlight/Emergency Light: It includes a built-in floodlight with multiple modes: steady floodlight, red emergency light, and SOS flashing red light.

Important Technical Specifications:

Battery Pack Energy: Contains a 55500 mWh internal battery.
Jump Start Capability: 12V/600Amps.
Input: 14V/0.85A (for charging the HALO BOLT ACDC MAX itself).
USB Output: 2x USB 5V/2.4A.
AC Output: Rated at 65 watts or less.
Dimensions: 3.82 x 7.17 x 1.6 inches.
Weight: 1.66 lbs.
Operating Temperature (During Charging): 32°F - 113°F (0°C - 45°C).
Operating Temperature (Discharge): 14°F - 122°F (-10°C - 50°C).
Storage Temperature: -4°F – 158°F (-20°C – 70°C).

Usage Features:

Charging the HALO BOLT ACDC MAX: Use the provided Wall Charging Adapter. Plug the DC jack into the charging input and the adapter into a wall outlet. The digital screen will show the charge percentage, and all five battery indicator bars will be solid green when fully charged (up to 9 hours). A "TEMP" indicator will appear if charging outside the recommended temperature range.
Jump Starting a Vehicle:
1. Plug jumper cables into the jump start output.
2. Attach red clamp to positive terminal (+) and black clamp to negative terminal (-) of the vehicle battery. The LCD will display the vehicle battery voltage.
3. Press the "Jump Start" button and wait for a solid green light (a flashing green light indicates safety checks).
4. Start the vehicle. If it fails to start, wait 30 seconds and repeat steps 3 and 4 (up to three attempts).
5. Disconnect jumper cable clamps from the car battery.
- Safety Precautions for Jump Starting: Do not touch red and black clamps together. If the jump start button flashes red and "SAFETY CHECK FAIL" appears, the cables are connected incorrectly; disconnect and restart. The jump start function cannot be used simultaneously with USB charging or AC output. A "TEMP" indicator will appear if used outside the safe temperature range.
Charging a Laptop (AC Output):
1. Connect the AC power plug from the laptop (or other electronic device rated 65 watts or less) into the AC output port.
2. Press the AC Power ON/OFF Button and wait for a solid green light.
- Safety Precautions for AC Output: Ensure the AC power plug is fully inserted. A flashing green light indicates safety checks. A flashing red light means the connected device is rated over 65 watts and cannot be powered. The charger automatically powers off after 30 minutes of inactivity. AC output cannot be used while jump starting or charging the HALO BOLT ACDC MAX itself.
Charging Electronic Devices (USB Output):
1. Connect the USB-C tip of the supplied USB-C cable into the electronic device's USB-C input and the standard USB end into one of the HALO BOLT ACDC MAX USB 5V/2.4A Output ports. If the device doesn't have USB-C, use its own charging cable with the HALO BOLT ACDC MAX USB ports.
2. Turn on USB charging by pressing the USB Power ON/OFF Button.
- HALO SMART CHARGE TECHNOLOGY: Provides faster and safer charging for standard 5V USB electronic devices.
- Automatic Shut-off: The USB charging feature automatically turns off after 30 minutes of inactivity. USB output cannot be used while jump starting or charging the HALO BOLT ACDC MAX itself.
Using the Floodlight:
- Press the Floodlight ON/OFF Button once for the floodlight.
- Press a second time for the red emergency light.
- Press a third time for the SOS flashing red light.
- The floodlight automatically turns off after 2 hours of inactivity.
- Caution: Do not look directly into the LED floodlight.

Maintenance Features:

Cleaning: Do not use harsh chemicals, soaps, or detergents. Wipe the case with a soft cloth.
Port Maintenance: Periodically use canned air to ensure charging ports are clear of lint and debris.
Storage: Keep the HALO BOLT ACDC MAX dry and away from moisture, corrosive materials, and heat sources (open flames, radiators, stoves, ovens). Do not expose to fire or excessive temperatures above 212°F (100°C).
Battery Disposal: Batteries should be recycled or disposed of according to state and local guidelines.
Ventilation: When charging the internal battery, work in a well-ventilated area and do not restrict ventilation.

Safety Precautions (General):

Read and understand all safety information before use to prevent electrical shock, explosion, fire, or property damage.
Misuse or incorrect connection can cause electric shock or damage.
Do not operate in explosive atmospheres.
Do not disassemble the unit; there are no user-serviceable parts. Incorrect reassembly can cause shock or fire.
Avoid dropping or strong impacts. Do not operate if damaged.
Do not puncture, crush, or subject to mechanical shock.
Only charge with the specified charging adapter provided.
Do not use non-HALO-branded accessories.
Do not operate with damaged cords, plugs, or output cables.
Keep away from children.
Pull the plug, not the cord, when disconnecting.
In case of leakage or explosion, use sand or a chemical fire extinguisher. If liquid contacts skin, flush with water; if it contacts eyes, seek medical help.
The unit may become warm during extended high-power operation; do not cover or restrict ventilation.

Troubleshooting:

The manual provides detailed troubleshooting tips for jump starting and laptop charging, addressing issues like:

Jump Start button not responding (USB or AC output active).
"BATT TOO LOW" message (unit needs charging).
"SAFETY CHECK FAIL" (incorrect jumper cable connection, low vehicle battery voltage).
"TEMP" indicator (unit outside operating temperature range).
Vehicle battery voltage > 12.0V but unable to jump start (faulty vehicle component).
Jump Start and On/Off button flashing red and blue (other electrical components drawing power, faulty vehicle battery).
AC power ON/OFF button flashing red (device rated > 65 watts).
HALO BOLT ACDC MAX shutting off unexpectedly (unit needs charging).

If troubleshooting tips do not resolve the issue, consult a certified mechanic.

Compliance:

The device complies with Part 15 of the FCC Rules, designed to provide reasonable protection against harmful interference in residential installations. It must be used with certified peripherals and shielded cables.

Warranty:

The HALO BOLT ACDC MAX is warranted for 90 days. For full details, visit ZAGG.com/warranty. Keep a copy of the purchase receipt as proof of purchase.