Zagg power amp 3 - User Manual

Power Amp
TM
3
Instructions
*WARRANTY REGISTRATION
Your ZAGG Power Amp
TM
3 comes with a one-year manufacturer’s warranty. In order to activate the warranty,
you must register your Power Amp 3 as well as keep your purchase receipt. If you purchased your Power
Amp 3 from Zagg.com, Zagg has already registered it and has a copy of your proof of purchase.
NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT: www.zagg.com/faq

Summary

Product Information

Warranty Registration

Activate warranty by registering Power Amp 3 and keeping receipt. Zagg.com purchases are pre-registered.

Getting Started

Introduction to Power Amp 3

Get ready to stay connected with your Power Amp 3; read instructions for use and portability.

Charging Functions

Charging Your Devices

Connect the Power Amp 3 via USB to charge your phone or other devices.

Recharging Your Power Amp 3

Connect micro USB to Power Amp 3 and USB end to 5V USB outlet for charging.

Using Your Power Amp 3

Operating the Flashlight

Press the flashlight button to turn it on or off. It auto-turns off after 10 minutes.

Checking Battery Status

Press the battery button; LEDs indicate remaining power: 75%+, 50-74%, 25-49%, or <24%.

Power Saving Advice

Unplug the charging cable when charging is complete to preserve portable battery power.

Zagg power amp 3 Specifications

General

Fast Charging	Yes
Dimensions	4.13in x 2.64in x 0.98in (105mm x 67mm x 25mm)
Weight	0.46 lbs (210g)
Wireless Charging	No
Capacity	10000mAh
Input Ports	USB-C
Input	5V/2A
Ports	1 USB-C, 1 USB-A