Need help?Do you have a question about the Zagg pro stylus 2 and is the answer not in the manual?
To pair Pro Stylus 2 with your device, push the rounded, capacitive end to enter pairing mode. Select "ZAGG Pro Stylus 2" from your device.
Turn on by pushing the rounded, capacitive end. Auto-activates on some iPads. Turns off after 15 mins inactivity or can be manually turned off.
Use the active end for thin, precise lines. Use the capacitive back end for scrolling through pages.
Double-clicking the rounded, capacitive end allows you to see your open apps.
Plug the cradle into a USB-C power source. Place the stylus flat side down in the center of the cradle for magnetic attachment.
A green light on the cradle indicates the stylus is correctly aligned and charging.
To pair Pro Stylus 2 with your device, push the rounded, capacitive end to enter pairing mode. Select "ZAGG Pro Stylus 2" from your device.
Turn on by pushing the rounded, capacitive end. Auto-activates on some iPads. Turns off after 15 mins inactivity or can be manually turned off.
Use the active end for thin, precise lines. Use the capacitive back end for scrolling through pages.
Double-clicking the rounded, capacitive end allows you to see your open apps.
Plug the cradle into a USB-C power source. Place the stylus flat side down in the center of the cradle for magnetic attachment.
A green light on the cradle indicates the stylus is correctly aligned and charging.
General| Charging Port | USB-C |
|---|---|
| Tilt Sensitivity | Yes |
| Palm Rejection | Yes |
| Color | Black |
| Replaceable Tip | Yes |
| Wireless Charging | No |
| Tip Type | Fine Point |
| Pressure Sensitivity | Yes |
| Material | Aluminum |
| Compatibility | Apple iPad, iPad Pro, iPad Air, iPad mini |
| Diameter | 8.9 mm |
To Next Page