ZAGI ZAGI-3C - User Manual

Wing span 48”
Wing area 3.33 sq. ft.
Airfoil ZAGI 2000
Weight 17-19 oz.
Speed range 6 to 45+ mph
Radio 2 channels w/mixing
TRICK R/C Products LLC 938 Victoria Avenue Venice, California 90291 (310) 301-1614 Voice
(310) 827-2288 Tech Support (310) 822-7695 Fax Visit http://www.Zagi.com Email: Zod@Zagi.com
ZAGI-3C
Features a 3 Carbon Fiber Spar Matrix
New 2000 upgrade... Lighter Thinner Stronger Faster !

Summary

Recommendations and Notes

Balancing Procedure

The Zagi-3C balances at 7 1/2 inches back from the nose. Adjust nose weight for proper balance.

Kit Contents and Requirements

Wing Assembly

Preparing Wing Cores and Beds

Remove imperfections from wing cores and beds. Sand panels and round the leading edge.

Wing Assembly and Component Installation

Installing Wing Spars

Apply adhesive to spar slots, align spars at the center, and secure with weights.

Installing Servos

Connect servos to the receiver, attach servo arms, and position servos in their bays.

Radio Installation

Taping Wings for Strength

Applying Adhesive and Fiber Tape

Apply spray adhesive to wing surfaces, then cover with fiber tape for reinforcement.

Elevon Preparation and Attachment

Preparing and Sanding Elevons

Sand elevons to match wing tip angle and cover them completely with color tape.

Creating Tape Hinges

Connecting Elevons to Servos

Attaching Control Rods and Clevises

Balancing the Aircraft

Marking Center of Gravity (CG)

Testing and Adjusting Balance

Final Adjustments and First Flight

Setting Elevon Trim and Throw

ZAGI ZAGI-3C Specifications

General

Brand	ZAGI
Model	ZAGI-3C
Category	Toy
Language	English