To Next PageTo Next Page
Need help?Do you have a question about the ZAGI ZAGI-DC and is the answer not in the manual?
Discusses the Center of Gravity (CG) and its impact on flight balance.
Explains the die-cut servo bays and electronics bay for receiver and battery.
Lists all parts included in the Zagi-5C model kit with quantities.
Specifies external components required for assembly and operation.
Outlines the necessary tools and materials for building the Zagi-5C.
Details identifying wing parts, beds, and pre-cut features.
Guides on taping beds, spraying adhesive, and gluing carbon fiber spars.
Instructions for applying fiber filament tape and color tape to the wing.
Covers elevon mixing, transmitter/receiver power-up, and servo centering.
Details positioning, cutting, and attaching elevons and control horns.
Guides on creating wire channels and installing receiver, battery, and switch.
Instructions for securing winglets and fitting the electronics bay hatch cover.
Explains final balancing using a dowel and adjusting control throws.
Procedures for preflight checks, glide tests, and safe launch techniques.
General
