Need help?Do you have a question about the ZALMAN CNPS10X Extreme and is the answer not in the manual?
General| Type | Cooler |
|---|---|
| Fan diameter | 120 mm |
| Suitable location | Processor |
| Rotational speed (max) | 2150 RPM |
| Rotational speed (min) | 1000 RPM |
| Noise level (low speed) | 20 dB |
| Noise level (high speed) | 39 dB |
| Compatible processor series | Intel Pentium 4, Intel Pentium D, Intel Pentium Dual-Core, AMD Phenom, AMD Phenom II Dual-Core Mobile, AMD Phenom II Quad-Core Mobile, AMD Phenom II Triple-Core Mobile, AMD Phenom II X2, AMD Phenom II X3, AMD Phenom II X4, AMD Phenom II X6, AMD Phenom II X8 |
| Supported processor sockets | Socket AM2, Socket AM2+, Socket AM3, Socket AM3+, Socket FM1, Socket FM2 |
| Mean time between failures (MTBF) | 50000 h |
| Connector(s) | 4-pin |
| Speed detection | Yes |
| Dimensions (WxDxH) | 100 x 135 x 160 mm |
| Power requirements | 12V |
| Material | Aluminium, Cooper |
| Bearing technology | Double ball bearing |
Weight and Dimensions| Weight | 920 g |
|---|
Optimally designed aluminum fins disperse heat away from the CPU via 5 heatpipes, while the high capacity 120mm fan quickly cools the heatsink for stable operation of high performance CPUs.
Includes PWM Mate, the world's first RPM controllable PWM fan speed controller, with the options of 3-Speed Auto or Manual Control Modes.
Switching noise eliminated 120mm fan incorporated for ultra quiet operation and Blue LEDs for cool aesthetics.
The entire heatsink of CNPS10X is 'Black-Pearl' Nickel Plated for long-term corrosion resistance, while the deep 'Black-Pearl' tone along with the high intensity Blue LEDs reinforce its powerful aesthetics.
The included all new high performance thermal grease ZM-STG2 maximizes heat transfer from the CPU to the base of CNPS10X Extreme for intensified cooling performance.
CNPS10X Extreme accommodates a broad range of sockets. Intel LGA1156/1366/775, AMD AM3/AM2+/AM2/754/939/940.
CNPS10X Extreme can effectively cool 340 watts of heat for stable operation of over-clocked high performance CPUs.
PWM Mate is the world's first RPM controllable PWM fan speed controller, offering Manual or Auto Control Modes with 3 fan speed settings.
Details minimum/maximum Fan RPM and Noise Level for PWM Mate Auto and Manual Modes.
CNPS10X Extreme has 2 ball-bearings with a lifespan over 50,000 hours, with 'switching noise' removed.
Supports Intel LGA1156/1366/775 and AMD AM3/AM2+/AM2/754/939/940 based CPUs.
Requires 'Mid Tower' or larger cases with at least 170mm height when laid on its side.
ZM-STG2 is syringe-applied for maximum performance; ZM-STG1 has a brush applicator and a diluting agent ratio of 7:3.
Apply approximately 1/3 of the provided thermal grease, adjusting for CPU surface flatness.
The 'Black Pearl' nickel plating ensures the heatsink maintains aesthetic quality and resists corrosion long-term.
Remove air guide, wear gloves, do not ingest thermal grease. Notify retailer of any product issues.
May require connecting only 3 pins for PWM fan on boards lacking 4-pin connectors.
Ensure PWM control is activated in motherboard BIOS settings for proper fan speed management.
Use a dry cloth with alcohol or acetone, avoiding contact with the motherboard.
Remove cooler before transporting PC to prevent damage. Reinstall after transport.
CPU cooler base larger than CPU core/IHS has no negative effect on performance.
80cm cable can be routed externally and attached with double-sided tape.
Fan will still function via motherboard control if PWM Mate malfunctions.
PWM Mate detaches/reattaches easily via a sliding mechanism.
Maximum airflow capacity is 87CFM at 2,150RPM.
Cooler should be installed so airflow is directed towards the case's back side.
Unscrew fan housing, pull down gently. Use a screwdriver/pen to guide power connector during reinstallation.
CNPS10X Extreme's thermal resistance is 0.118°C/W, tested on a 'dummy heater'.
Proper installation ensures any motherboard warping is within safe limits for stable operation.
Compatibility information is available on Zalman's website and includes specific Intel/AMD socket types.
Cooler should be installed so airflow is directed towards the case's back side.
The LED color cannot be changed.
Remove old thermal compound and apply fresh layer for reinstallation to maintain heat transfer performance.
To Next Page