To Next PageTo Next Page
Need help?Do you have a question about the ZALMAN CNPS9X OPTIMA and is the answer not in the manual?
General| Type | Cooler |
|---|---|
| Bearing type | Rifle bearing |
| Fan diameter | 120 mm |
| Maximum airflow | 60.98 cfm |
| Suitable location | Processor |
| Rotational speed (max) | 1500 RPM |
| Rotational speed (min) | 600 RPM |
| Noise level (high speed) | 26 dB |
| Compatible processor series | - |
| Supported processor sockets | LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 775 (Socket T), Socket AM3, Socket AM3+, Socket AM4, Socket FM2, Socket FM2+ |
| Pulse-width modulation (PWM) support | Yes |
| Material | Aluminium, Copper |
| Product color | Aluminium, Black, Copper colour |
| Number of fans | 1 fan(s) |
| Illumination color | White |
| Number of heat pipes | 4 |
| Thermal Design Power (TDP) | 150 W |
Weight and Dimensions| Depth | 72 mm |
|---|---|
| Width | 123 mm |
| Height | 156 mm |
| Weight | 594 g |
Lists common parts like Cooler, Fan, Clips, Manual, Thermal Grease, Dampers.
Lists Intel-specific components like Clip Support and Push-Pins.
Details the required physical space around the CPU socket for cooler installation.
Instructions to remove air guides from the case to ensure proper cooler fit.
Recommends the optimal orientation for cooler installation for airflow.
Attaching the cooler to the Intel/AMD clip support.
Attaching the damper to the fan screw hole.
Latching the fan fixing clips to the heatsink notches.
Clearing CPU surface and applying thermal grease.
Installing the cooler assembly onto the motherboard clip support.
Connecting the cooler's 4-pin connector to the motherboard's CPU fan header.
