14
P0004
P0219
80
95
Operating sequence
Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C,
with the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main
wash compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a
time, shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent
recommended by the manufacturer in a
graduated cup and pour it into the main wash
compartment . If you wish to carry out the
prewash, pour detergent into the appropriate
compartment marked .
3. Measure out the additive
If required, pour fabric softener into the
compartment marked without exceeding the
«MAX» mark.
4. Select the desired option(s)
Depress one or more buttons, depending on the
selected programme.
5. Select the temperature
Turn the selector dial to the required
temperature setting.
i
FJS 1084
P0226
P0223
FJS 974 N
C0009
C0010
To Next Page
Loading...
Need help?
General
