4.2.8. End of the programme
When the selected programme is over, the appliance stops
automatically and the timer knob stays on a stop-position
(the control lamp lights off) or on a rinse hold position.
The programmes end :
• by a spinning (for the cotton programmes).
• by a short spinning (for the synthetics, delicate and wool
programmes).
At the end of the cycle, release the on/off pushbutton to
switch the appliance off. Release any other pushbuttons that
are pressed in. Pull out the electricity plug and close the wa-
ter supply tap.
Note: we recommend that you should leave the lid and the
drum open after use to air the washing drum.
To Next Page
Loading...
