ENGLISH
9
“End of programme” light
This light flashes at the end of the cooling phase and
during the anti-creasing phase.
Water full indicator light
This light flashes when the water reservoir is full.
The reservoir may also be emptied during a
programme.
In this case, after having fitted back in place, the
start button must be pressed again for the
programme to resume.
This light also flashes at the end of the drying phase
(after cooling) and during the anti-creasing phase.
10 Programme/Time selector dial
Allows you to select electronically controlled or time
controlled drying.
Turn the dial to the required programme or time.
Electronically controlled drying
(automatic)
The appliance runs these programmes with the help
of probes which detect the degree of dampness of
the laundry.
Simply select the programme according to the type
of laundry and degree of drying required.
Time controlled drying
Can be used to finish off drying if necessary.
Select the 60 minute programme for cottons or the
30 minute programme for synthetics.
To cancel a programme which is running, turn the
programme selector dial to “0”.
At the end of drying, turn the selector dial to “0”
before removing the laundry.
To Next Page
Loading...
