Zanussi Z714W43BI - User Manual

Questions and Answers

M
Matthew WallaceAug 10, 2025
How to fix Zanussi Washer when the programme does not start?
- J
  joshuaguerreroAug 11, 2025
  If the Zanussi Washer program isn't starting, ensure the mains plug is correctly connected to the socket. Also, check that the appliance door is fully closed and that there are no blown fuses in your fuse box. Verify that you've touched the Start/Pause button. If a delay start is active, either cancel it or wait for the countdown to finish. Deactivate the Child Lock if it's enabled, and confirm that the knob is correctly positioned on your chosen program.
A
Anthony DavisAug 15, 2025
What to do if Zanussi Z714W43BI does not drain the water?
- J
  John GordonAug 16, 2025
  If your Zanussi Washer isn't draining water, check that the sink spigot isn't clogged and that the drain hose has no kinks or bends. Also, ensure the drain filter isn't clogged; clean it if necessary. Verify that the drain hose is correctly connected. If you selected a program without a drain phase or an option that ends with water in the tub, set the drain program.
I
Isabel WilliamsAug 23, 2025
Why the spin phase does not operate in Zanussi Z714W43BI Washer?
- J
  Julian FloydAug 23, 2025
  If the spin phase of your Zanussi Washer isn't working or the wash cycle is taking longer than usual, try setting the spin program. Make sure the drain filter isn't clogged; clean it if needed. If there are balance issues, manually adjust the items in the tub and restart the spin phase.
S
Stephen CabreraAug 28, 2025
Why Zanussi Z714W43BI Washer does not fill with water properly?
- T
  Tiffany JohnsonAug 28, 2025
  If your Zanussi Washer isn't filling with water properly, first, make sure the water tap is fully open. Check that the water supply pressure isn't too low. Ensure the water tap isn't clogged. Inspect the inlet hose for any kinks, damages, or bends, and verify it's correctly connected. Also, check that the filter of the inlet hose and the filter of the valve are not clogged.
B
Benjamin WilkersonSep 3, 2025
Why Zanussi Z714W43BI Washer fills with water and drains immediately?
- J
  Jennifer GaySep 3, 2025
  If the Zanussi Washer fills with water and drains immediately, make sure the drain hose is in the correct position. The hose may be positioned too low.

Zanussi Z714W43BI Specifications

General

Loading type	Front Load
Colour	White
Load Capacity	7 kg
Spin Speed	1400 RPM
Energy Efficiency Class	A+++
Width	60 cm
Spin-drying class	B
Noise level (spinning)	75 dB
Water consumption	45 l
Programs	15
Depth	540 mm