What to do if there is water on the floor near my Zanussi Z716WT83BI Washer/Dryer?
If you find water on the floor, check the water hoses couplings to ensure they are tight and not leaking. Also, inspect the water inlet and drain hoses for any damages. Finally, make sure you are using the correct type and amount of detergent.
What to do if the mains supply is unstable for my Zanussi Z716WT83BI Washer/Dryer?
Wait until the mains supply is stable.
Why Zanussi Z716WT83BI programme duration increases or decreases?
The AutoAdjust System can adjust the programme duration according to the type and size of the laundry load.
Why are there detergent residues in the dispenser drawer of my Zanussi Z716WT83BI after washing?
If you find detergent residues in the dispenser drawer after the washing cycle, ensure that the flap is in the correct position (UP for powder detergent, DOWN for liquid detergent). Also, make sure you're using the detergent dispenser according to the user manual's instructions.
Why is my laundry full of different colours fluff after using Zanussi Washer/Dryer?
If your laundry is full of different colored fluff, it means the fabrics washed in the previous cycle released fluff of a different color. The drying phase can help eliminate some fluff. Clean the clothes with a fluff remover. If there's an excessive amount of fluff in the drum, run the special programme to clean it.
What causes too much foam in the drum of my Zanussi Z716WT83BI Washer/Dryer?
If there's too much foam in the drum during the wash cycle, reduce the quantity of detergent you're using.
Why Zanussi Z716WT83BI fills with water and drains immediately?
If your Zanussi Washer/Dryer fills with water and drains immediately, check that the drain hose is in the correct position, as it may be positioned too low.
Why are the washing results not satisfactory with my Zanussi Washer/Dryer?
If your washing results aren't satisfactory, try increasing the detergent quantity or using a different detergent. For stubborn stains, pretreat them with special stain removal products before washing. Ensure you're setting the correct temperature and consider decreasing the laundry load.
Why does my Zanussi Z716WT83BI make unusual noises and vibrate?
If your Zanussi Washer/Dryer is making unusual noises and vibrating, ensure the appliance is correctly leveled. Also, make sure that the packaging and/or transit bolts have been removed. If the load is too small, add more laundry to the drum.
Why Zanussi Z716WT83BI does not dry correctly?
If your Zanussi Washer/Dryer is not drying correctly, make sure the water tap is on and the drain filter isn't clogged. Try reducing the laundry load and ensure you have set the correct cycle. If needed, set a short drying time again.
Safety guidelines for children and vulnerable individuals regarding appliance use.
Important general safety precautions for operating the appliance.
Guidelines for safe installation and electrical connection of the appliance.
Instructions for water connection and safe usage practices.
Instructions for installing the anti-tilting accessory for enhanced safety.
Final steps for connecting the appliance to the mains socket.
Detailed explanation of each button and indicator on the control panel.
Explanation of the various indicators and information shown on the digital display.
General information on using the appliance's controls and options.
How to select power, modes, temperature, and spin speed.
Using Flextime, Child Lock, Time Dry, and Auto Dry features.
How to start, pause, and delay the start of washing programmes.
A detailed chart listing programmes, temperatures, spin speeds, loads, and descriptions.
Initial steps before using the appliance.
Guidance for day-to-day washing, including detergent use.
How to select programmes, start, and pause them.
How to change delay start and interrupt/change programmes.
Explanation of the automatic load detection feature.
Using automatic dryness settings for combined cycles.
Detailed steps for cleaning the appliance's drain pump and filter.
Guidance on diagnosing and resolving common appliance problems.
Explanation of error codes and potential causes.
Procedure for safely opening the appliance door in case of failure.
General| Annual water consumption washing | 10400 L |
|---|---|
| Annual energy consumption washing | 160 kWh |
| Annual water consumption washing & drying | 19000 L |
| Annual energy consumption washing & drying | 940 kWh |
| Connected load | 2000 W |
| AC input voltage | 230 - 240 V |
| AC input frequency | 50 Hz |
| Energy efficiency scale | A to G |
| Water consumption washing per cycle | 52 L |
| Energy consumption washing per cycle | 0.8 kWh |
| Water consumption washing & drying per cycle | 95 L |
| Energy consumption washing & drying per cycle | 4.7 kWh |
| Drying capacity | 4 kg |
| Washing capacity | 7 kg |
| Residual moisture | 44 % |
| Spin-drying class | - |
| Maximum spin speed | 1600 RPM |
| Noise level (spin) | 70 dB |
| Noise level (wash) | 48 dB |
| Delayed start timer | Yes |
| Noise level (drying) | 52 dB |
| Cycle time washing & drying | 550 min |
| Door hinge | Left |
| Control type | Buttons, Rotary |
| Loading type | Front-load |
| Product color | White |
| Appliance placement | Built-in |
| Cord length | 1.5 m |
| Inlet hose length | 1.3 m |
| Door opening angle | 130 ° |
| Outlet hose length | 1.4 m |
Weight and Dimensions| Depth | 540 mm |
|---|---|
| Width | 596 mm |
| Height | 819 mm |
| Installation compartment depth | 560 mm |
| Installation compartment width | 600 mm |
| Installation compartment height | 820 mm |
To Next Page
