Zanussi Z814W85BI User Manual (English)

Questions and Answers:

M
Mark Smith VAug 21, 2025
What to do if my Zanussi Z814W85BI does not start or stops during operation?
- A
  Ann DanielsAug 21, 2025
  If your Zanussi Washer doesn't start or stops mid-cycle, ensure the mains plug is correctly inserted into the socket, and the appliance door is fully closed. Check the fuse box for any damaged fuses. Also, verify that you've touched the Start/Pause button. If a delayed start is set, either cancel it or wait for the countdown. Deactivate the Child Lock if it's active, and ensure the knob is correctly positioned on the desired program.
M
mdavisAug 22, 2025
What to do if the door of my Zanussi Washer is open or not closed correctly?
- J
  Jennifer BarronAug 22, 2025
  If the door of your Zanussi Washer isn't closed properly, double-check that it's fully shut. If the appliance is overloaded, remove some items from the drum. Then, hold the door shut while pressing the Start/Pause button until the indicator stops flashing.
E
elizabethmarshallAug 25, 2025
What to do if my Zanussi Z814W85BI Washer doesn't drain water?
- M
  Madeline SharpAug 25, 2025
  If your Zanussi Washer isn't draining, check a few things. First, make sure the sink spigot isn't clogged. Next, ensure the drain hose has no kinks or bends. Also, verify the drain filter isn't clogged; clean it if needed. Confirm that the drain hose connection is correct. Finally, if you set a program without a drain phase or one that ends with water in the tub, set the drain program.
D
donnajordanAug 26, 2025
What to do if you cannot open the Zanussi Z814W85BI Washer door?
- S
  Scott GuzmanAug 27, 2025
  If you cannot open the Zanussi Washer door, first check if a washing programme that ends with water in the tub was selected. Make sure the washing programme has finished. If there's water in the drum, set the drain or spin programme. Also, ensure the appliance is receiving electrical power.
M
Melissa RogersAug 28, 2025
Why is the spin phase not working or the wash cycle taking too long on my Zanussi Washer?
- C
  Christopher RichAug 28, 2025
  If the spin phase isn't working or the wash cycle is longer than usual on your Zanussi Washer, try setting the spin programme. Check if the drain filter is clogged and clean it if necessary. If there are balance problems, manually adjust the items in the tub and restart the spin phase.
S
stephenselizabethAug 29, 2025
What to do if Zanussi Z814W85BI Washer door is open or not closed correctly?
- K
  Kevin LambertAug 29, 2025
  If the Zanussi Washer door is open or not closed correctly, make sure that the door is properly closed.
D
Dawn MillerAug 31, 2025
How to fix a Zanussi Z814W85BI Washer that won't fill with water properly?
- T
  Thomas BarryAug 31, 2025
  If your Zanussi Washer isn't filling with water properly, start by ensuring the water tap is fully open. Check that the water supply pressure isn't too low by contacting your local water authority. Make sure the water tap isn't clogged. Inspect the inlet hose for any kinks, damages, or bends, and ensure it's correctly connected. Finally, check that the filter of the inlet hose and the filter of the valve are not clogged.
A
Alexis CunninghamSep 2, 2025
Why won't my Zanussi Z814W85BI Washer programme start?
- D
  Dawn LoveSep 2, 2025
  If your Zanussi Washer programme won't start, make sure the mains plug is correctly connected to the socket and the appliance door is fully closed. Check the fuse box for any damaged fuses. Ensure you've touched the Start/Pause button. If the delay start is set, either cancel the setting or wait for the countdown to finish. Deactivate the Child Lock if it's active, and check the position of the knob on the selected programme.
G
Gregory WilliamsSep 4, 2025
Why is there water on the floor near my Zanussi Z814W85BI Washer?
- K
  Kristy HendersonSep 4, 2025
  If you find water on the floor near your Zanussi Washer, check that the water hose couplings are tight and not leaking. Inspect the water inlet and drain hoses for any damage. Also, ensure you're using the correct detergent and the right amount.
L
Lori RogersSep 5, 2025
How to stop my Zanussi Z814W85BI Washer from making unusual noises and vibrating?
- P
  perezlauraSep 5, 2025
  To reduce unusual noise and vibration from your Zanussi Washer, ensure the appliance is correctly leveled. Make sure that the packaging and/or the transit bolts are removed. If the load is too small, add more laundry to the drum.

Zanussi Z814W85BI Specifications

General

Door hinge	Left
Water fill	Cold
Cord length	1.5 m
Drum volume	52 L
Control type	Buttons, Rotary
Loading type	Front-load
Product color	White
Custom panel-ready	Yes
Outlet hose length	1.45 m
Appliance placement	Built-in
Dispenser tray type	3-way
Drum capacity	8 kg
Wi-Fi controlled	No
AquaStop function	-
Residual moisture	52 %
Spin-drying class	B
Maximum spin speed	1351 RPM
Minimum spin speed	900 RPM
Noise level (spin)	69 dB
Noise level (wash)	48 dB
Number of washing programs	14
Connected load	2000 W
AC input voltage	230 - 240 V
AC input frequency	50 Hz
Energy consumption washing per cycle	- kWh
Annual water consumption washing	10999 L
Annual energy consumption washing	176 kWh

Weight and Dimensions

Depth	540 mm
Width	596 mm
Height	819 mm
Depth with door open	553 mm
Installation compartment depth	560 mm
Installation compartment width	600 mm
Installation compartment height	820 mm