EasyManua.ls Logo

Zanussi Z816WT85BI - User Manual

Zanussi Z816WT85BI
44 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GETTING
STARTED?
EASY.
User Manual
Z816WT85BI
EN User Manual
Washer Dryer

Table of Contents

Questions and Answers

  • M
    Mary PageAug 11, 2025
    Why won't my Zanussi Washer/Dryer start?
    • C
      carterjenniferAug 11, 2025
      If your Zanussi Washer/Dryer program won't start, there are several things to check: * Ensure the mains plug is properly connected to the socket. * Verify the appliance door is fully closed. * Check the fuse box for any damaged fuses. * Confirm that you've touched the Start/Pause button. * If delay start is active, either cancel it or wait for the countdown. * Deactivate the Child Lock if it's enabled. * Make sure the program knob is correctly positioned on your desired setting.
  • E
    Emily JosephAug 17, 2025
    What to do if my Zanussi Z816WT85BI doesn't drain water?
    • J
      Jose McdonaldAug 17, 2025
      If your Zanussi Washer/Dryer isn't draining water, try the following: * Check if the sink spigot is clogged. * Make sure the drain hose isn't kinked or bent. * Inspect the drain filter for clogs and clean it if needed. * Ensure the drain hose is correctly connected. * If you selected a program without a drain phase, set the drain program. * If you selected an option that ends with water in the tub, set the drain program.
  • W
    william16Aug 23, 2025
    Why is my Zanussi Z816WT85BI Washer/Dryer not filling with water properly?
    • G
      gina64Aug 23, 2025
      If your Zanussi Washer/Dryer isn't filling with water properly, check these: * Ensure the water tap is fully open. * Verify the water supply pressure isn't too low. * Make sure the water tap isn't clogged. * Check the inlet hose for kinks, damages, or bends. * Ensure the water inlet hose is correctly connected. * Make sure that the filter of the inlet hose and the filter of the valve are not clogged.
  • B
    Bradley MurrayAug 29, 2025
    What to do if my Zanussi Z816WT85BI Washer/Dryer fills with water and drains immediately?
    • N
      nicole56Aug 29, 2025
      If your Zanussi Washer/Dryer fills with water and drains immediately, make sure the drain hose is in the correct position. The hose may be positioned too low.
  • M
    Mr. Jason EllisonSep 3, 2025
    How to fix a Zanussi Z816WT85BI Washer/Dryer when the spin cycle doesn't work or the cycle lasts too long?
    • R
      rhondabartonSep 3, 2025
      If the spin phase isn't working or the wash cycle is taking longer than usual on your Zanussi Washer/Dryer: * Set the spin program. * Ensure the drain filter isn't clogged; clean it if necessary. * Manually adjust the items in the tub and restart the spin phase. This issue may arise from balance problems.

Zanussi Z816WT85BI Specifications

General IconGeneral
TypeWasher/Dryer
ColourWhite
Washing Capacity8 kg
Drying Capacity5 kg
Spin Speed1600 rpm
Energy Efficiency Class WashingA
Energy Efficiency Class Washing + DryingB
Noise Level (Drying)60 dB
Delay StartYes
Child LockYes
Energy Efficiency ClassA
DisplayDigital

Related product manuals