Zanussi ZBA32050SV User Manual (English)

Questions and Answers:

G
gsuttonAug 12, 2025
Why does my Zanussi ZBA32050SV Refrigerator compressor run constantly?
- R
  Rachel WallaceAug 13, 2025
  If your Zanussi Refrigerator's compressor is running non-stop, it could be due to several reasons. The temperature might be set incorrectly (refer to "Operation" for guidance). Putting too many food items in at once or placing warm food inside can also cause this. Ensure food cools to room temperature first. High room temperature can be a factor, so check the climate class chart. Also, make sure the refrigerator door is properly closed (refer to "Closing the door"). Finally, check if "QuickChill" is activated and deactivate it (refer to "QuickChill").
L
Lisa JohnsonAug 16, 2025
Why is the temperature in my Zanussi ZBA32050SV Refrigerator too high or low?
- P
  Paul KennedyAug 16, 2025
  There are several reasons why the temperature in your Zanussi refrigerator might be too high or too low. First, check the temperature regulator and set it correctly to a higher or lower setting as needed. Ensure the door is closing properly (refer to "Closing the door"). Allow warm food to cool before storing it, and avoid storing too many items at once. Opening the door frequently can also affect the temperature, so open it only when necessary. If "QuickChill" is on, turn it off (refer to "QuickChill"). Finally, ensure proper cold air circulation inside the appliance.
O
obarnesAug 20, 2025
What to do if my Zanussi ZBA32050SV Refrigerator does not turn on?
- G
  garcialoriAug 20, 2025
  If your Zanussi Refrigerator isn't working, first, make sure that the appliance is switched on. Then, check if the mains plug is correctly connected to the mains socket. If it still doesn't work, test the socket with another appliance to see if there is a voltage. If there is no voltage, contact a qualified electrician.
T
Terry ShawAug 25, 2025
Why is water leaking inside my Zanussi ZBA32050SV Refrigerator?
- J
  James MillerAug 25, 2025
  If water is flowing inside your Zanussi refrigerator, ensure that food products are not blocking the water from flowing into the water collector by making sure they do not touch the rear plate. Also, check if the water outlet is clogged and clean it if necessary.
S
Shari HayesAug 27, 2025
How to fix the light in my Zanussi ZBA32050SV Refrigerator?
- C
  Corey MacdonaldAug 28, 2025
  If the lamp in your Zanussi Refrigerator isn't working, first check if it's in stand-by mode by closing and opening the door. If that doesn't work, the lamp may be defective, and you should contact the nearest Authorised Service Centre.
M
Margaret DavisAug 31, 2025
Why is my Zanussi ZBA32050SV leaking water on the floor?
- D
  Darryl FernandezAug 31, 2025
  If water is flowing onto the floor from your Zanussi refrigerator, it means that the melting water outlet is not connected to the evaporative tray above the compressor. To fix this, attach the melting water outlet to the evaporative tray.
H
Hannah GilesSep 4, 2025
Why can't I set the temperature on my Zanussi ZBA32050SV?
- F
  Frank LivingstonSep 4, 2025
  If you cannot set the temperature on your Zanussi Refrigerator, it might be because the "QuickChill" function is activated. You can either manually switch off "QuickChill" or wait for it to reset automatically to adjust the temperature. Refer to "QuickChill" for more information.
I
isantiagoSep 7, 2025
Why doesn't the Zanussi ZBA32050SV compressor start immediately after using QuickChill?
- C
  Charles Vega DDSSep 7, 2025
  The compressor starts after a period of time.