What to do if Zanussi ZDC82B4PW stops during operation?
If your Zanussi Dryer stops during operation, first ensure that the water container is empty. Then, press Start/Pause to restart the program. If the load is too small, either increase the load size or switch to the Time Dry program.
Why Zanussi Dryer does not heat up?
If your Zanussi Dryer isn't heating up, it might be due to a clogged filter or the emergency heater shut-down. Clean the filter.
Why is the Zanussi Dryer cycle time too long?
If your Zanussi Dryer cycle time is too long or the drying result is unsatisfactory, ensure the laundry weight is appropriate for the program. Also, check if the filter is clean and that the laundry isn't too wet; re-spin it if necessary. The room temperature should be between +5°C and +35°C, ideally 18°C to 25°C. You can also try setting the Time Dry or Extra Dry program.
Why the Zanussi ZDC82B4PW Dryer programme does not start?
If the Zanussi Dryer program doesn't start, make sure you press the Start/Pause button and ensure that the appliance door is fully closed.
How to fix Zanussi Dryer door that does not close?
If the door of your Zanussi Dryer does not close, make sure that the filter is installed correctly and that no laundry is caught between the door and the rubber seal.
What to do if Zanussi ZDC82B4PW Dryer display shows an Error code?
If the display of your Zanussi Dryer shows an error code (e.g., E51), try deactivating and then reactivating the appliance. Start a new program. If the problem persists, contact the Service.
To Next Page
General