Why does my Zanussi Dryer keep stopping?
Ensure the water container is empty. Press the Start/Pause button to restart the programme. If the load is too small, increase it or use the Time Drying programme.
Why is my Zanussi Dryer not heating up?
This issue may be caused by a clogged filter, which can trigger the emergency heater shut-down. Clean the filter, referring to the CARE AND CLEANING chapter for instructions.
Why won't my Zanussi Dryer programme start?
Ensure that you have pressed the Start/Pause button. Also, verify that the appliance door is fully closed.
Why is the Zanussi ZDPB274B cycle taking too long?
Ensure the laundry weight matches the programme's intended capacity. Check that the filter is clean. If the laundry is too wet, spin it again in the washing machine. The room temperature should be between +5°C and +35°C, ideally 18°C to 25°C. You can also try setting the Time Drying or Extra Dry programme.
What does E90 error mean on Zanussi ZDPB274B?
The E90 or E91 error code indicates an internal failure, meaning there's no communication between the electronic elements of the appliance. Turn the appliance off and on again. If the error code reappears, contact an Authorised Service Centre.
How to fix E50 error on Zanussi ZDPB274B Dryer?
The E50 error code indicates that the appliance motor is overloaded, possibly due to too much laundry or laundry being trapped in the drum. Remove the laundry, set the programme again, and restart the cycle.
What does EH0 error mean on Zanussi ZDPB274B?
The EH0 error code indicates that the mains supply is unstable. Wait until the main supply is stable, then press start. If the appliance pauses without indication, press the cycle start. If the warning persists, check the power cord/socket integrity or the main supply.
What to do if Zanussi Dryer door won't close?
Ensure that the filter is installed correctly. Also, check that no laundry is caught between the appliance door and the rubber seal.
Why does my Zanussi Dryer display 1 minute for too long?
This can happen if the filter is clogged, triggering the emergency heater shut-down. Clean the filter, referring to the CARE AND CLEANING chapter for instructions.
What does 'Err' mean on my Zanussi ZDPB274B display?
If the display shows 'Err', and you want to set a new programme, deactivate and then reactivate the appliance. Also, ensure that the options you've selected are compatible with the chosen programme.
General| Heat source | - |
|---|---|
| Connected load | 2800 W |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Energy consumption | 4.23 kWh |
| Energy efficiency scale | A+++ to D |
| Annual energy consumption | 504 kWh |
| Cycle time | 129 min |
| Noise level | 67 dB |
| Drum capacity | 7 kg |
| Moisture sensor | Yes |
| Door hinge | Left |
| Control type | Buttons, Rotary |
| Display type | LCD |
| Loading type | Front-load |
| Drying system | Condensation |
| Product color | White |
| Appliance placement | Freestanding |
Weight and Dimensions| Depth | 555 mm |
|---|---|
| Width | 596 mm |
| Height | 850 mm |
Safety guidelines for children and vulnerable individuals using the appliance.
Instructions for correctly installing the appliance to ensure safe operation.
Guidance on safely connecting the appliance to the electrical power supply.
Overview of the appliance's components and parts.
Explanation of the appliance's control panel layout and functions.
A table detailing available program options and their compatibility.
How to activate and deactivate the child lock feature for safety.
Guide to customizing the default dryness level of the drying cycles.
Instructions for enabling or disabling the appliance's acoustic signals.
Information about potential smells upon initial use of the appliance.
Explanation of normal operating sounds the appliance might produce.
Step-by-step guide to start a drying cycle, with or without delay.
Managing programmes, including changes and end-of-cycle procedures.
Explanation of the appliance's energy-saving stand-by mode.
Advice on how to prepare laundry for optimal drying results.
Instructions on how to clean the appliance's lint filter for efficiency.
Explains error codes displayed by the appliance and their solutions.
To Next Page
