25
Installation instruction
Unpacking
All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all transit devices so
that they can be refitted if the machine ever
has to be transported again.
1. After removing all the packaging, carefully
lay machine on it’s back to remove the
polystyrene base from the bottom.
2. Remove the power supply cable and the
draining hose and inlet hose from the hose
holders on the rear of the appliance.
3. With a suitable spanner unscrew and
remove the central rear bolt A.
Information
The consumption data shown on this chart is to
be considered purely indicative, as it may vary
depending on the quantity and type of laundry,
on the inlet water temperature and on the
ambient temperature. It refers to the highest
temperature for each wash programme.
(*) The «Cotton» 60° + the option Economy
selected with a load of 6 kg is the
reference programme for the data entered
in the energy label, in compliance with EEC
92/75 standards.
Consumption values
Energy
consumption
(in kWh)
Programme
Programme
duration
Water
consumption
(in litres)
Cotton 90°C
2.1 57
Cotton 60°C 1.2
53
Cotton 60°+ Economy selected
1.02
42
Synthetics 60°C
0.9 44
0.45 58
Delicates 40°C
Handwash 40°
Wool 40°
0.55 56
0.45
58
For the duration of the
programmes, please refer to the
display
on the control panel
132956230.qxd 26/01/2009 8.32 Pagina 25
To Next Page
Loading...
Need help?
General
