Zanussi ZWF844B3PW - User Manual

Questions and Answers

M
Mrs. Amanda VasquezAug 19, 2025
Why won't my Zanussi Washer start?
- R
  Rachel WilliamsSep 12, 2025
  If your Zanussi Washer isn't starting, verify that the mains plug is correctly connected to the socket. Also, ensure the appliance door is fully closed and that there's no damaged fuse in the fuse box. Confirm that you've touched the Start/Pause button. If a delay start is set, either cancel it or wait for the countdown. Deactivate the Child Lock if it's enabled and check the knob position to ensure it's on the selected program.
M
Melissa MurrayAug 21, 2025
What to do if my Zanussi Washer does not drain the water?
- J
  Julia KerrAug 21, 2025
  If your Zanussi Washer isn't draining water, first check that the sink spigot isn't clogged and that the drain hose has no kinks or bends. Ensure the drain hose is correctly connected. If you set a program without a drain phase or an option ending with water in the tub, set the drain program.
C
Christopher ChoiAug 25, 2025
What to do if I cannot open the Zanussi ZWF844B3PW Washer door?
- S
  sarahfranklinAug 25, 2025
  If you can't open the door of your Zanussi Washer, ensure that a washing program that ends with water in the tub hasn't been selected and that the washing program is finished. If there is water in the drum, set the drain or spin program. Also, make sure the appliance is receiving electrical power.
S
Shawn OliverAug 26, 2025
Why the spin phase does not operate in my Zanussi ZWF844B3PW Washer?
- J
  Julie McdonaldAug 26, 2025
  If the spin phase of your Zanussi Washer isn't working or the washing cycle lasts longer than usual, set the spin program. If there are balance problems, manually adjust the items in the tub and start the spin phase again.
G
Gary HernandezAug 27, 2025
What to do if the Zanussi Washer door is open or not closed correctly?
- T
  Travis SmithAug 28, 2025
  If the door of your Zanussi Washer is open or not closed correctly, make sure that the door is properly closed.
I
Ian KennedyAug 30, 2025
Why is there water on the floor near my Zanussi ZWF844B3PW?
- M
  Melissa CastilloAug 30, 2025
  If there is water on the floor near your Zanussi Washer, make sure the water hose couplings are tight and not leaking. Check that the water inlet and drain hoses are not damaged, and ensure you are using the correct detergent in the correct quantity.
T
Troy Bartlett MDSep 1, 2025
How to fix Zanussi ZWF844B3PW that does not fill with water properly?
- M
  Miss Lisa JosephSep 1, 2025
  If your Zanussi Washer isn't filling with water properly, make sure the water tap is fully open and that the water supply pressure isn't too low. Check that the water tap isn't clogged and that the inlet hose has no kinks, damages, or bends. Ensure the water inlet hose is correctly connected. Also, verify that the filter of the inlet hose and the filter of the valve are not clogged.
J
Justin RuizSep 3, 2025
Why is my Zanussi Washer making an unusual noise and vibrating?
- S
  Steven MaddenSep 3, 2025
  If your Zanussi Washer is making unusual noises and vibrating, ensure the appliance is correctly leveled and that all packaging and transit bolts have been removed. If the load is too small, add more laundry to the drum.
S
Stacy TurnerSep 5, 2025
How to improve unsatisfactory washing results from my Zanussi ZWF844B3PW Washer?
- S
  smurraySep 5, 2025
  If the washing results from your Zanussi Washer are not satisfactory, increase the detergent quantity or use a different detergent. For stubborn stains, use special stain removal products before washing. Make sure you set the correct temperature and decrease the laundry load.
A
Amy HallSep 7, 2025
Why does my Zanussi ZWF844B3PW Washer fill with water and drain immediately?
- J
  Jessica ChandlerSep 7, 2025
  If your Zanussi Washer fills with water and drains immediately, ensure that the drain hose is in the correct position and is not positioned too low.

Summary

SAFETY INFORMATION

CHILDREN AND VULNERABLE PEOPLE SAFETY

SAFETY INSTRUCTIONS

INSTALLATION

Guidelines for installing the appliance safely.

ELECTRICAL CONNECTION

USE

PRODUCT DESCRIPTION

APPLIANCE OVERVIEW

INSTALLATION

UNPACKING

POSITIONING AND LEVELLING

How to correctly position and level the appliance.

WATER INLET HOSE CONNECTION

Connecting the water inlet hose.

WATER DRAINAGE

CONTROL PANEL

CONTROL PANEL DESCRIPTION

Description of buttons and indicators on the control panel.

DISPLAY

PROGRAMME CHART

PROGRAMME OPTIONS COMPATIBILITY

SUITABLE DETERGENTS

OPTIONS

WASHING OPTIONS

DELAY START

BEFORE FIRST USE

DAILY USE

LOADING THE LAUNDRY

How to load laundry correctly into the washing machine.

FILLING THE DETERGENT AND ADDITIVES

LIQUID OR POWDER DETERGENT

SETTING A PROGRAMME

STARTING PROGRAMME WITHOUT DELAY

STARTING PROGRAMME WITH DELAY

AUTOSENSE SYSTEM

PROGRAMME MANAGEMENT

INTERRUPTING AND CHANGING OPTIONS

CANCELLING A PROGRAMME

END OF PROGRAMME

HINTS AND TIPS

LAUNDRY LOAD GUIDELINES

DETERGENT TYPE AND QUANTITY

CARE AND CLEANING

PERIODIC CLEANING SCHEDULE

CLEANING THE DRUM

DESCALING

MAINTENANCE WASH

DOOR SEAL WITH DOUBLE LIP TRAP

CLEANING THE DETERGENT DISPENSER

CLEANING THE INLET HOSE AND VALVE FILTER

FROST PRECAUTIONS

COMMON PROGRAMMES

TROUBLESHOOTING

ALARM CODES AND FAILURES

Common error codes and their solutions.

COMMON PROBLEMS AND SOLUTIONS

Addressing issues like programme start, water filling, and noise.

Summary

SAFETY INFORMATION

CHILDREN AND VULNERABLE PEOPLE SAFETY

SAFETY INSTRUCTIONS

INSTALLATION

Guidelines for installing the appliance safely.

ELECTRICAL CONNECTION

USE

PRODUCT DESCRIPTION

APPLIANCE OVERVIEW

INSTALLATION

UNPACKING

POSITIONING AND LEVELLING

How to correctly position and level the appliance.

WATER INLET HOSE CONNECTION

Connecting the water inlet hose.

WATER DRAINAGE

CONTROL PANEL

CONTROL PANEL DESCRIPTION

Description of buttons and indicators on the control panel.

DISPLAY

PROGRAMME CHART

PROGRAMME OPTIONS COMPATIBILITY

SUITABLE DETERGENTS

OPTIONS

WASHING OPTIONS

DELAY START

BEFORE FIRST USE

DAILY USE

LOADING THE LAUNDRY

How to load laundry correctly into the washing machine.

FILLING THE DETERGENT AND ADDITIVES

LIQUID OR POWDER DETERGENT

SETTING A PROGRAMME

STARTING PROGRAMME WITHOUT DELAY

STARTING PROGRAMME WITH DELAY

AUTOSENSE SYSTEM

PROGRAMME MANAGEMENT

INTERRUPTING AND CHANGING OPTIONS

CANCELLING A PROGRAMME

END OF PROGRAMME

HINTS AND TIPS

LAUNDRY LOAD GUIDELINES

DETERGENT TYPE AND QUANTITY

CARE AND CLEANING

PERIODIC CLEANING SCHEDULE

CLEANING THE DRUM

DESCALING

MAINTENANCE WASH

DOOR SEAL WITH DOUBLE LIP TRAP

CLEANING THE DETERGENT DISPENSER

CLEANING THE INLET HOSE AND VALVE FILTER

FROST PRECAUTIONS

COMMON PROGRAMMES

TROUBLESHOOTING

ALARM CODES AND FAILURES

Common error codes and their solutions.

COMMON PROBLEMS AND SOLUTIONS

Addressing issues like programme start, water filling, and noise.

Zanussi ZWF844B3PW Specifications

General

Door hinge	Left
Water fill	Cold
Cord length	1.8 m
Drum volume	53 L
Control type	Buttons, Rotary, Touch
Display type	LED
Door opening	Side opening
Loading type	Front-load
Drum material	Stainless steel
Product color	White
Reversible doors	No
Country of origin	Poland
Inlet hose length	1.3 m
Outlet hose length	1.45 m
Appliance placement	Freestanding
Dispenser tray type	2-way
Inverter technology	Yes
Brand specific tub material	Carboran
Drum capacity	8 kg
Delay start (max)	20 h
Residual moisture	53 %
Spin-drying class	B
Maximum spin speed	1400 RPM
Noise level (spin)	76 dB
Noise level (wash)	- dB
Number of washing programs	14
Cycle time (quick washing program)	14 min
Current	13 A
Connected load	2000 W
Power plug type	Type G
AC input voltage	230-240 V
AC input frequency	50 Hz
Water consumption per cycle	43 L
Energy consumption washing per cycle	0.625 kWh
Package depth	626 mm
Package width	640 mm
Package height	900 mm
Package weight	66000 g
UK Trade Tariff code	84501190
Paper packaging weight	15 g