EasyManua.ls Logo

Zanussi ZWI712UDWA - User Manual

Zanussi ZWI712UDWA
40 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GETTING
STARTED?
EASY.
User Manual
ZWI712UDWA
EN User Manual
Washing Machine

Table of Contents

Questions and Answers

  • K
    Kevin WilkinsAug 10, 2025
    Why my Zanussi Washer does not start?
    • S
      shamptonAug 10, 2025
      There are several reasons why your Zanussi Washer might not be starting. Ensure the mains plug is correctly connected to the socket and that the appliance door is fully closed. Check the fuse box for any damaged fuses. Also, make sure you have touched the Inicio/Pausa button. If the delay start is active, either cancel it or wait for the countdown to finish. Deactivate the Child Lock if it's enabled, and confirm the knob is correctly positioned on your chosen program.
  • L
    lunakatherineAug 16, 2025
    What to do if my Zanussi Washer does not drain the water?
    • H
      Harold BerryAug 16, 2025
      If your Zanussi Washer isn't draining, start by checking the sink spigot for any clogs. Ensure the drain hose isn't kinked or bent, and inspect the drain filter for blockages, cleaning it if necessary. Verify the drain hose connection is correct. If you've selected a program without a drain phase or an option that leaves water in the tub, set the drain program accordingly.
  • D
    Dr. Danielle WilliamsAug 22, 2025
    What to do if Zanussi ZWI712UDWA Washer spin phase does not operate?
    • C
      Christopher FloresAug 22, 2025
      If the spin phase on your Zanussi Washer isn't working, first, set the spin program. Check the drain filter for any clogs and clean it if needed. If the issue persists, manually adjust the items inside the tub to balance the load, and then restart the spin phase.
  • M
    Mary GrantAug 28, 2025
    How to fix Zanussi Washer that fills and drains immediately?
    • P
      Patricia JonesAug 29, 2025
      If your Zanussi Washer fills with water and drains immediately, ensure the drain hose is in the correct position. The hose may be positioned too low.
  • N
    nvaughnSep 3, 2025
    Why Zanussi ZWI712UDWA fills with water slowly?
    • D
      Doris BakerSep 3, 2025
      If your Zanussi Washer isn't filling with water properly, make sure the water tap is fully open. Check that the water supply pressure isn't too low. Ensure the water tap isn't clogged and that the inlet hose has no kinks, damages, or bends. Confirm the water inlet hose is correctly connected. Also, inspect the inlet hose filter and valve filter for clogs, cleaning them if necessary.

Zanussi ZWI712UDWA Specifications

General IconGeneral
CategoryWasher
Washing Capacity7 kg
Spin Speed1200 rpm
Water consumption45 L
ColourWhite
Noise Level (Spin)76 dB(A)

Related product manuals