Zanussi ZWQ71265CE User Manual (English)

Questions and Answers:

D
Diane HardyAug 19, 2025
What to do if Zanussi ZWQ71265CE Washer does not start?
- H
  Henry WattsAug 19, 2025
  If your Zanussi Washer isn't starting, ensure the mains plug is correctly connected to the socket. Check that both the appliance lid and drum door are fully closed. Verify there's no damaged fuse in the fuse box. Confirm that you've touched the Start/Pause button. If a delay start is active, either cancel it or wait for the countdown to finish. Also, ensure the Child Lock function is deactivated if it's enabled and check the knob is in the correct position for your selected program.
A
Amy SandersAug 21, 2025
What to do if Zanussi Washer does not drain the water?
- M
  Michelle CraigAug 21, 2025
  If your Zanussi Washer isn't draining water, make sure the sink spigot isn't clogged. Check the drain hose for kinks or bends. Ensure the drain filter isn't clogged by cleaning it if necessary. Verify the drain hose connection is correct. If you selected a program without a drain phase or an option that ends with water in the tub, set the drain program.
S
Sandra DukeAug 25, 2025
Why can't I open the Zanussi ZWQ71265CE Washer lid?
- K
  kathryn54Aug 25, 2025
  If you cannot open the lid of your Zanussi Washer, first check if a washing program that ends with water in the tub has been selected. Make sure the washing program has finished. If there is still water in the drum, set the drain or spin program. Also, ensure that the appliance is receiving electrical power.
A
Anthony SanchezAug 26, 2025
Why does the Zanussi ZWQ71265CE Washer spin phase not operate or the washing cycle last longer than usual?
- S
  Sean RiveraAug 27, 2025
  If the spin phase of your Zanussi Washer isn't working or the cycle is longer than usual, ensure you've set the spin program. Check that the drain filter isn't clogged and clean it if needed. If there are balance problems, manually adjust the items in the tub and restart the spin phase.
S
Sarah ReyesAug 28, 2025
Why is there water on the floor from my Zanussi ZWQ71265CE?
- K
  Kayla LyonsAug 28, 2025
  If you find water on the floor near your Zanussi Washer, check that the water hose couplings are tight and not leaking. Inspect the water inlet and drain hoses for any damages. Also, ensure you are using the correct type and amount of detergent.
M
Morgan KelleyAug 30, 2025
What to do if Zanussi ZWQ71265CE does not fill with water properly?
- L
  Linda OsbornAug 30, 2025
  If your Zanussi Washer isn't filling with water correctly, first ensure the water tap is fully open. Check that the water supply pressure isn't too low. Make sure the water tap isn't clogged. Inspect the inlet hose for any kinks, damages, or bends, and verify it's correctly connected. Also, check that the filter of the inlet hose and the filter of the valve are not clogged.
D
David SmithSep 1, 2025
Why does my Zanussi ZWQ71265CE Washer make unusual noises and vibrate?
- J
  Joshua LucasSep 2, 2025
  If your Zanussi Washer is making unusual noises and vibrating, ensure the appliance is correctly leveled. Make sure that the packaging and transit bolts have been removed. Try adding more laundry to the drum, as the load may be too small.
S
Stephen MaloneSep 4, 2025
Why is there too much foam in the drum of my Zanussi ZWQ71265CE Washer?
- S
  Stacie BlakeSep 4, 2025
  If there's too much foam in the drum of your Zanussi Washer during the washing cycle, try reducing the quantity of detergent you're using.
R
Rachel ConradSep 6, 2025
Why are the washing results not satisfactory with my Zanussi Washer?
- U
  usmithSep 6, 2025
  If you're not satisfied with the washing results from your Zanussi Washer, try increasing the detergent quantity or switching to a different detergent. Consider using special products to pre-treat stubborn stains. Ensure you've set the correct temperature for the load and try decreasing the laundry load size.
X
xwalkerSep 8, 2025
What to do if Zanussi ZWQ71265CE Washer fills with water and drains immediately?
- S
  Steve PriceSep 9, 2025
  If your Zanussi Washer fills with water and drains immediately, make sure that the drain hose is in the correct position. The hose may be positioned too low.

Zanussi ZWQ71265CE Specifications

General

Load Capacity	7 kg
Spin Speed	1200 rpm
Energy Efficiency Class	A+++
Water Consumption	9900 L/year
Loading type	Front load
Noise emission class	C
Width	60 cm
Height	85 cm