4
IMPORTANT
Please follow the current navigation laws in the country where Zapata Flyride™ will be used.
MAINTENANCE
WARNING: NEVER use hydrocarbons (like acetone or petrol) on polycarbonate parts (all see-through
parts) as these products can seriously damage the material.
To ensure adequate security, we recommend to:
- Change ball bearings every year. For assembly, please use silicone grease or Vaseline (no marine
grease or other product containing hydrocarbons that may damage the Flyboard® material).
- Change all o-rings and wear rings every year
- Rince Zapata Flyride™ with clear water after every use
- Change the servo/brainbox every two years
- Respect the number of cycles of battery charges recommended by the manufacturer
WARRANTY
Zapata Flyride™ is covered by warranty against all manufacturing faults for 1 year following the
date of purchase. You will be required to provide your purchasing invoice.
ZAPATA® will provide warranty cover on Zapata Flyride™ only if used as described in this manual.
Warranty is limited to the operation and not the visual condition of the parts.
Warranty does not cover any part subject to wear and tear (ball bearings, o-rings, wear wings, hose,
guard, etc.)
Zapata Flyride™ must be used in its original configuration. It is strictly forbidden and dangerous to
modify, remove or add parts other than those provided by ZAPATA®.
Breakage of equipment caused by falls or violent/extreme use will not be covered by warranty.
ZAPATA® cannot be held responsible for such usage of the product.
To Next Page