Final test form
Installation created in ZAPTEC Portal and charging station(s)
added.
Customer has been invited as installation owner.
Isolation testing and continuity testing have been performed prior
to installation of the charging station and the phase sequence has
been checked.
Charging station installed and congured against the correct
electricity network via the ZAPTEC app.
Charging station connected to the internet and upgraded to the
latest rmware version via ZAPTEC app.
Alternatively congured for “ofine” use if there is no internet
connection available at the current time. Certain functions and
services will not be available without an internet connection.
Charging station tested using test instruments (voltage testing and
RCD testing).
Customer has received information about ZAPTEC Premium and
how the charging station works.
Installer signature:
To Next Page
Loading...
Need help?
General
