7
English
Installation
1. Plug Zaptec Sense
G
into the energy meter’s HAN/P1
port
E
with the included cable
F
and wait for at least
3 minutes while the device is booting. Move to the next step
when Zaptec Sense starts blinking orange.
H
2. Download the Zaptec app from App Store or Google Play.
Create an account or log in.
3. To install Zaptec Sense, tap the three dots
I
in the upper right
corner of the Dashboard screen and select Install Product.
4. Scan the QR-code on the back of Zaptec Sense
or this manual. Follow the on-screen instructions.
5. Once the light indicator on Zaptec Sense changes
to continuous white, the installation is complete.
Configuration
If you need to change network settings after installation,
hold your phone near Zaptec Sense, open the Zaptec app
and tap the three dots to configure Zaptec Sense.
To Next Page
Loading...