Zareba ESP10M-Z User Manual (English)

To Next Page

ZAREBA 10 MILE SOLAR POWERED LOW IMPEDANCE ELECTRIC FENCE CHARGER

When installing, your fence charger should be:

 Sheltered from the weather (except solar chargers), either indoors protected from moisture

or outdoors in a protective enclosure.

 Close to 110-volt AC power source (unless battery or solar powered).

Need help?

Do you have a question about the Zareba ESP10M-Z and is the answer not in the manual?

Zareba ESP10M-Z Specifications

General

Model number ESP10M-Z, output energy 0.15 joules, and output voltage 9.5 KV.

Supports various fence line types and provides distance ratings for different weed conditions.

Suitable for cattle, goats, and horses, with features like remote fence indication and durable design.

Requires 72-hour initial charge and proper ground rod installation for operation.

Use an electric fence tester to monitor status and consult the manual for detailed procedures.

Shelter charger from weather or use a protective enclosure, and place near power source if not solar.

Ensure separate grounding and connect charger off ground using appropriate hook-up wire.